Industrial Doctorate Centre in Advanced Forming and Manufacture

先进成型与制造工业博士中心

• 批准号: EP/I015698/1
• 负责人: Jeffery Brooks
• 金额: $ 156.89万
• 依托单位: University of Strathclyde
• 依托单位国家: 英国
• 项目类别: Training Grant
• 财政年份: 2011
• 资助国家: 英国
• 起止时间: 2011 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=EP%2FI015698%2F1
• 关键词: Industrial; Doctorate; Centre; Advanced; Forming

SummaryThis proposal is to establish an Industrial Doctorate Centre (IDC) in 'Advanced Forming and Manufacture' located in the Advanced Forming Research Centre (AFRC) of the University of Strathclyde. The proposed centre will bring together staff at Strathclyde with in depth expertise covering the metallurgy, forming and forging, computational simulation, micro-manufacture, automation, process control, measurement, operations management, quality control and sustainable manufacturing to create a Centre of learning and research with strong links to many of the UK's leading manufacturers. The 3000m2 AFRC will create a stimulating environment for the EngD students in a purpose built facility created specifically to support manufacturing research which makes the latest process simulation and modelling software available alongside a wide range of industrial manufacturing hardware and supporting materials and metrology laboratory facilities. This proposal aims to put the IDC at the core, of an internationally leading group in Advanced Forming and Manufacturing technology and so draw on strong links to EPSRC, EU and TSB funded research activity. To meet the interdisciplinary research demands of manufacturing industry a substantial centre bringing together all the relevant skills on a single site is essential. This requires a critical mass of staff and early stage researchers of the sort that this proposal can deliver. It is also clear from Government and other reports that a vibrant high value manufacturing industry in the UK, and elsewhere, will be limited by a severe shortage of skilled engineers unless the universities dramatically increase the scale of their activities in this area.Research at the proposed IDC will be based in the Advanced Forming Research Centre but with a wider scope covering all aspects of manufacturing technology and its application: from the forging of turbine blades in exotic alloys to the low cost fabrications of micro-components. Fundamental technology issues to be addressed by the IDC will include computational simulation, condition monitoring, control systems and tool life: the manufacturing systems issues will include analysis of performance data, demand management, whole system simulation (from warehouse to microstructure) and a design of experiments approach to process improvement. The teaching elements of the centre will be developed and delivered by the Department of Manufacturing and Engineering Management. The driver behind the activity of the IDC will be to meet the challenges arising from the rapid growth in overseas competition and the need for low energy processes and systems to meet the UK's targets for carbon emission reduction. The major themes for the proposed IDC are the following: - Forging technology - Advanced Materials - Process Improvement Micro-system Manufacture - Information Management - Operations Management - Process DesignThe total student numbers are 32 with 8 studentships supported by industry, 6 by the AFRC and 8 by the University with funding requested from EPSRC for a further 10 studentships. The planning for the proposed centre has assumed a seven year period with an initial intake of 6 rising to 10 by year four. The student numbers associated with both industry and the University will provide strong support to the EPSRC studentships requested. Thus the actual funding window of the centre will span a period of 84 months with each cohort spanning 48 months with a total cost for the centre of 3.136M of which 1.231 is requested from EPSRC.

这项提议是在斯特拉斯克莱德大学的先进成形研究中心(AFRC)建立一个先进成形与制造方面的工业博士中心(IDC)。拟建的中心将汇集Strathclyde的员工，他们拥有冶金、成形和锻造、计算模拟、微型制造、自动化、过程控制、测量、运营管理、质量控制和可持续制造等方面的深厚专业知识，将创建一个学习和研究中心，与英国许多领先的制造商建立牢固的联系。3000平方米的AFRC将在专门为支持制造业研究而建造的设施中为EngD学生创造一个激励的环境，使最新的工艺模拟和建模软件与各种工业制造硬件和辅助材料以及计量实验室设施一起使用。这项提议旨在将IDC置于先进成形和制造技术的国际领先小组的核心地位，从而利用与EPSRC、欧盟和TSB资助的研究活动的强大联系。为了满足制造业的跨学科研究需求，一个将所有相关技能集中在一个地点的重要中心是必不可少的。这需要大量的工作人员和这项提案所能提供的那种早期研究人员。政府和其他报告也清楚地表明，除非大学大幅增加在这一领域的活动规模，否则英国和其他地方充满活力的高价值制造业将受到熟练工程师严重短缺的限制。拟议中的IDC的研究将以先进成形研究中心为基础，但范围更广，涵盖制造技术及其应用的方方面面：从用外来合金锻造涡轮叶片到低成本制造微型部件。IDC要解决的基本技术问题将包括计算模拟、状态监测、控制系统和刀具寿命：制造系统问题将包括性能数据分析、需求管理、整个系统模拟(从仓库到微观结构)和用于工艺改进的实验设计方法。该中心的教学内容将由制造和工程管理部开发和提供。IDC活动背后的驱动力将是应对海外竞争快速增长带来的挑战，以及对低能源流程和系统的需求，以实现英国的碳减排目标。建议的国际数据中心的主要主题如下：-锻造技术-先进材料-工艺改进-微系统制造-信息管理-运营管理-工艺设计学生总数为32人，其中8人由工业界资助，6人由AFRC资助，8人由大学资助，EPSRC要求资助另外10名学生。拟建中心的规划期为七年，最初的收容人数为6人，到第四年增至10人。与行业和大学相关的学生数量将为EPSRC申请的学生提供强有力的支持。因此，该中心的实际供资窗口将跨度为84个月，每个队列跨度为48个月，中心的总费用为313.6万英镑，其中1.231英镑是从该中心申请的。