Novel Gas Turbine Combustor Designs for Flexible Power Generation using Additive Layer Manufacturing

使用增材层制造实现灵活发电的新型燃气轮机燃烧室设计

• 批准号: 2117277
• 金额: --
• 依托单位: CARDIFF UNIVERSITY
• 依托单位国家: 英国
• 项目类别: Studentship
• 财政年份: 2018
• 资助国家: 英国
• 起止时间: 2018 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=studentship-2117277
• 关键词: Novel; Gas; Turbine; Combustor; Designs

Cardiff University's Gas Turbine Research Centre (GTRC) specialises in detailed characterisation of GT combustors through advanced laser diagnostics and optical combustors. GTRC recently manufactured, using Renishaw ALM, water-cooled nozzles which could not be built otherwise for an idealised burner. The aim of this Renishaw co-funded PhD project is to take the next logical step to optimise ALM for novel GT combustor designs, where surface finish, air and fuel injection, and cooling are critical to avoid inefficient combustion and/or excessive emissions. Carbon-free fuels such as hydrogen and ammonia will be a specific focus, in particular 'rich-quench-lean' combustor technologies. The novel designs will then be fully characterised at the University's GTRC facility using a suite of optical, acoustic, and emissions measurement as well as modelling techniques to evaluate future market potential. The project aligns with the EPSRC areas of Fossil Fuel Power Generation and Combustion Engineering

卡迪夫大学的燃气轮机研究中心(GTRC)通过先进的激光诊断和光学燃烧室专门研究燃气轮机燃烧室的详细特征。GTRC最近使用雷尼绍ALM制造了水冷喷嘴，以其他方式无法制造出理想的燃烧器。雷尼绍联合资助的这一博士项目的目标是采取下一步合理的步骤，针对新颖的燃气轮机燃烧室设计优化ALM，其中表面光洁度、空气和燃料喷射以及冷却对于避免低效燃烧和/或过度排放至关重要。氢气和氨气等无碳燃料将成为重点，特别是“浓淡”燃烧室技术。然后，这些新颖的设计将在该大学的GTRC设施中充分体现出来，使用一套光学、声学和排放测量以及建模技术来评估未来的市场潜力。该项目与EPSRC化石燃料发电和燃烧工程领域相一致