FLEXICON

点击翻译按钮获取中文摘要

We will micro-mould a mesh network of channels into a UV curable polymer dielectric film to define a pattern into which we will plate copper or nickel using either a catalyst ink-jet printed in register or a sacrificial metal carrier. The metal track width will be small enough (~5 micron) to ensure the film is highly transparent (>89%) but thick enough (3 to 5 micron) to give the surface of the film a low surface resistance (<1 ohm per square) and excellent mechanical robustness. Thin conducting polymer or metal layers will be deposited on top as required. We will make the transparent conducting layer onto both rolls of film and sheets of glass. Processes for futher patterning of the layer will be also developed. The project partners make a complete supply chain from basic research to end users in markets for touch screens, EMI shielding, lighting, signage and displays, including OLED and PLED along with large area EL.