PHASE III RADIATION ENCLOSURES

该子项目是利用 由NIH/NCRR资助的中心赠款提供的资源。子项目和 研究者（PI）可能从另一个NIH来源获得主要资金， 因此可以在其他CRISP条目中表示。列出的机构是 中心，不一定是研究者的机构。 第三期弯磁束线辐射罩的建设已按计划完成。114.根据合同，Tecknit Shielding，Inc.建造了辐射罩并安装了相关的公用设施。APS已经完成了前端准直和快门系统以及人员保护系统的安装。在5月最后一周APS加速器恢复运行后，成功验证了外壳的辐射完整性，整个24-BM外壳将准备好安装光学组件和实验设备。

This subproject is one of many research subprojects utilizing the resources provided by a Center grant funded by NIH/NCRR. The subproject and investigator (PI) may have received primary funding from another NIH source, and thus could be represented in other CRISP entries. The institution listed is for the Center, which is not necessarily the institution for the investigator. Construction of the Phase III bending magnet beam line radiation enclosures has been completed on schedule. The construction of the radiation enclosures and installation of the associated utilities was performed under contract by Tecknit Shielding, Inc. APS has completed installation of the front end collimation and shutter systems as well as the Personnel Protection System. Following successful validation of the radiation integrity of the enclosures upon resumption of APS accelerator operations the last week in May, the entire 24-BM enclosure will be ready for installation of the optical components and experimental equipment.