Fouling and gasification studies

结垢和气化研究

• 批准号: 6856-2007
• 负责人: Watkinson, AlanPaul
• 金额: $ 2.66万
• 依托单位: University of British Columbia
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2009
• 资助国家: 加拿大
• 起止时间: 2009-01-01 至 2010-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=420335
• 关键词: Fouling; gasification; studies

Deposition onto surfaces of heat exchangers and other processing equipment is costly in terms of energy and operating efficiency. If root causes of fouling can be established, design or operating changes can be made to mitigate the problem. Mechanisms leading to deposition in hydrocarbon systems include autoxidation, polymerization, incompatibility of asphaltenes, coking reactions, iron sulphide formation etc. The objectives of this research are to determine the underlying mechanisms of fouling for certain classes of complex fluids ( eg sour crude oils), and obtain a quantitative expression for the fouling rate which operators or designers can use to control fouling. The research approach is to use batch reactors for reaction and precipitation studies, followed by fouling measurements in re-circulation heat transfer loops. Effects of process variables and extensive characterization of fluids, precipitates and deposits helps to identify mechanisms. Models are used to express results and make predictions of rate behaviour. Tools include asphaltene flocculation titrations, solvent fractionation of fluids and deposits, and standard methods such as SEM, EDX, TGA and DRIFTS. Topics include crude oil fouling; relation between asphaltene precipitation, coking and fouling in heavy oil systems; deposition of fine droplets from heavy oil vapour systems; and autoxidation fouling in naphthas and gas oils. Novelty lies in the comprehensive research approach, the real fluids studied, and the unique facilities available for the research which permit realistic data under industrially important conditions. Research is also underway supporting the concept of a future biomass refinery. Similar approaches to those given above are being applied to study biomass pyrolysis oil behaviour during heating. Our previous gasification research with coal and biomass is being extended to produce synthesis gas from bio-oil/wood char slurries.

在热交换器和其他处理设备的表面上的沉积在能量和操作效率方面是昂贵的。 如果可以确定结垢的根本原因，则可以进行设计或操作更改以减轻问题。 导致沉积在烃类系统的机制包括自氧化，聚合，沥青质的不相容性，焦化反应，硫化铁的形成等。本研究的目的是确定潜在的机制，为某些类别的复杂流体（如含硫原油）的污垢，并获得一个定量表达式的污垢率，操作员或设计师可以用来控制污垢。 研究方法是使用间歇式反应器进行反应和沉淀研究，然后在再循环传热回路中进行污垢测量。 过程变量的影响以及流体、沉淀物和沉积物的广泛表征有助于确定机制。 模型用于表达结果并预测速率行为。 工具包括沥青质絮凝滴定、流体和沉积物的溶剂分馏以及标准方法如SEM、EDX、TGA和DRIFTS。 主题包括原油结垢;重油系统中沥青质沉淀、结焦和结垢之间的关系;重油蒸汽系统中细液滴的沉积;石脑油和瓦斯油中的自氧化结垢。 新奇在于综合研究方法、研究的真实的流体以及可用于研究的独特设施，这些设施允许在工业重要条件下获得真实的数据。 研究也在进行中，以支持未来生物质炼油厂的概念。 与上面给出的方法类似的方法被应用于研究加热期间生物质热解油的行为。 我们以前的煤和生物质气化研究正在扩展到从生物油/木焦浆中生产合成气。