Novel Asphalt Cement Test Methods and Compositions for Improved Flexible Pavement Performance

用于改进柔性路面性能的新型沥青水泥测试方法和组合物

• 批准号: 122240-2013
• 负责人: Hesp, Simon
• 金额: $ 1.75万
• 依托单位: Queen's University
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2014
• 资助国家: 加拿大
• 起止时间: 2014-01-01 至 2015-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=545416
• 关键词: Novel; Asphalt; Cement; Test; Methods

A primary research objective will be to develop simplified performance grading tests and acceptance criteria for asphalt allowing user agencies to better control pavement cracking. A secondary objective is to use these tests and criteria to design better modified asphalt for Canadian industry. Our work will focus on ways to shorten the time it takes to obtain data on how asphalt cements gradually harden during cold conditioning, addressing a concern that current tests take too long. Empirical and fundamental models will be used to predict long-term properties from short-term tests. A secondary objective will be to investigate improved asphalt compositions. The use of polymers to increase the temperature range over which an asphalt cement meets minimum performance requirements is well established. The most commonly used are block copolymers made with styrene and butadiene. However, polymers that contain a diene functional group in their backbone suffer from rapid oxidative degradation in service and a consequent loss in desirable properties. Hence, we will investigate how polymers with less diene functionality (high vinyl grades) or no diene (styrene-butyl acrylate copolymers) can be utilized. It is hypothesized that such materials outperform those currently available in the industry because of their significantly higher resistance to polymer chain cleavage. Finally, we will investigate how the base asphalt's oxidative stability can be improved. It is expected that oil sand bitumen can provide significantly enhanced starting materials for asphalt formulation. Oil sand bitumen derived asphalt cements are relatively low in readily oxidized, polar molecules, and hence should suffer little from gradual, reversible hardening at cold temperatures, or irreversible hardening through reaction with oxygen. However, there are currently no publications on this topic. Improved specification tests and asphalt compositions will be developed through both basic and applied interdisciplinary research. Both undergraduate and graduate students will be trained in important areas including rheology, failure mechanics, materials science and engineering, polymers, thermal analysis, etc. The research will lead to significant benefits for Canada's roads and knowledge base.

一个主要的研究目标将是开发简化的性能分级测试和验收标准的沥青，使用户机构更好地控制路面开裂。第二个目标是使用这些测试和标准，为加拿大工业设计更好的改性沥青。我们的工作将集中在如何缩短获得沥青水泥在冷调节过程中如何逐渐硬化的数据所需的时间，解决目前测试时间过长的问题。经验和基本模型将用于从短期测试中预测长期属性。第二个目的是研究改进的沥青组合物。使用聚合物来增加沥青水泥满足最低性能要求的温度范围是公认的。最常用的是由苯乙烯和丁二烯制成的嵌段共聚物。然而，在其主链中含有二烯官能团的聚合物在使用中遭受快速氧化降解和随之而来的期望性能的损失。因此，我们将研究如何使用具有较少二烯官能度（高乙烯基等级）或没有二烯（苯乙烯-丙烯酸丁酯共聚物）的聚合物。据推测，这种材料优于目前在工业中可用的那些，因为它们对聚合物链断裂的抗性显著更高。最后，我们将研究如何提高基质沥青的氧化稳定性。预期油砂沥青可提供用于沥青配制的显著增强的起始材料。油砂沥青衍生的沥青胶结料在易氧化的极性分子中相对较低，因此在低温下几乎不会发生逐渐的可逆硬化，或者通过与氧反应发生不可逆硬化。然而，目前还没有关于这一主题的出版物。将通过基础和应用跨学科研究开发改进的规格测试和沥青组合物。本科生和研究生都将接受重要领域的培训，包括流变学、失效力学、材料科学与工程、聚合物、热分析等。