Cold spray: effect of mixing powders

点击翻译按钮获取中文摘要

Cold spray is a seemingly simple method to apply metal coatings to metal, ceramic and polymer surfaces by accelerating metal powders of about 20 to 40 micron particle diameter to supersonic speeds using a carrier gas, usually nitrogen. On impact with the substrate to be coated, the particles severely plastically deform and instantaneously bond to the substrate and each other. The coating of the substrate takes place in air at room temperature. The usual methods to bond powder particles are performed at very high temperatures, between about 80% of the melting point and even upto the melting point, and require very long times, at least a few hours. Clearly the short times and the fact that coatings are done in air are obviously advantageous; room temperature processing means that heat damage is avoided and also means that unlikely materials pairings are possible, such as polymers embedded in a metal matrix. Moreover, very thick 3D coatings can be made, thus elevating the process to one of additive manufacturing.