Development of a borescope for 3D scanning

开发用于 3D 扫描的管道镜

• 批准号: 538119-2019
• 负责人: Thibault, Simon
• 金额: $ 1.82万
• 依托单位: Université Laval
• 依托单位国家: 加拿大
• 项目类别: Engage Grants Program
• 财政年份: 2019
• 资助国家: 加拿大
• 起止时间: 2019-01-01 至 2020-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=680469
• 关键词: Development; borescope; 3D; scanning

With the automation in the manufacturing sector and the necessity to remain competitive, the instrustry needs to constantly improve processes effectiveness, quality and cost. Precise measurement of holes is an important task in industries such as automotive and aerospace. For example, currently a fuselage manufacturing production process uses robotics for drilling and fastening. Typically, the robot will drill and place fasteners in 9 holes, then drill a hole without placing a fastener, and repeat the program. Every 300 holes, the robot is shut down for an inspector to measure the open holes. If a single hole is out-of-tolerance, it is likely that many are also out-of-tolerance, and all have to be inspected. A robust hole measurement system, capable of measuring several hole types, can be put on the robot to measure every hole, thereby increasing the processes efficiency and reliability.

随着制造业的自动化和保持竞争力的必要性，该机构需要不断提高流程效率，质量和成本。孔的精确测量是汽车和航空航天等行业的重要任务。例如，目前机身制造生产过程使用机器人进行钻孔和紧固。通常情况下，机器人将在9个孔中钻孔并放置紧固件，然后在不放置紧固件的情况下钻孔，并重复该程序。每钻300个洞，机器人就会关闭，让检查员测量开放的洞。如果一个孔超出公差范围，很可能有许多孔也超出公差范围，因此必须对所有孔进行检查。一个强大的孔测量系统，能够测量多种类型的孔，可以放在机器人上测量每个孔，从而提高了工艺效率和可靠性。