Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
基本信息
- 批准号:RGPIN-2016-05451
- 负责人:
- 金额:$ 2.62万
- 依托单位:
- 依托单位国家:加拿大
- 项目类别:Discovery Grants Program - Individual
- 财政年份:2019
- 资助国家:加拿大
- 起止时间:2019-01-01 至 2020-12-31
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
A number of high frequency technologies emerged over the past few years that offer interesting functionalities. Metamaterials, for example, introduced materials with properties that do not exist in nature. They are used in building miniaturized antennas, sensors, and filters that operate in different frequency ranges. Plasmonic devices utilize metal-dielectric interfaces to guide light below the diffraction limit. This allows the implementation of photonic devices with much smaller dimensions thus promising more integration of photonic processing units. Nano antennas (nantennas) were presented for high frequency energy harvesting and line-of-sight communication. Terahertz (THz) applications also emerged thanks to the recent availability of THz sources and detectors. All these technologies utilize materials whose properties may be dependent on source values (nonlinear), dependent on frequency (dispersive), or dependent on the direction of excitation (anisotropic). Different combinations of these properties may exist in such high frequency structures. These complex properties make the accurate modeling of these devices time- and memory-intensive. Optimization of these structures often requires estimating sensitivities of the target response with respect to all parameters. The classical approach for estimating these sensitivities requires repeated simulations of these time-intensive structures which may be prohibitive.***In this proposal, we will build on our expertise in adjoint sensitivity analysis to develop universal adjoint sensitivity approaches. These approaches will apply to general high frequency structures whose materials may exhibit any combination of nonlinearity, dispersion, and anisotropy. Using our approaches, the sensitivities of the desired response or objective function will be estimated using at most one extra simulation regardless of the number of parameters. Adjoint sensitivities will be applied to the design optimization of metamaterial structures, plasmonic structures, nantennas, and THz filters and frequency selective surfaces. We will apply our developed adjoint techniques to the area of wideband cloaking where a cloak can possess a large number of optimizable parameters. We will also utilize adjoint sensitivity analysis to improve the accuracy of THz imaging and spectroscopy of different samples.***The proposed research addresses important areas of research for Canada and the world including energy harvesting, THz medical imaging, and wideband cloaking of electrically large objects. It will result in novel technologies that will be utilized by Canadian companies to create new products or develop existing ones. It will also train a good number of high quality personnel (HQP) on modeling, design optimization, fabrication, and characterization of advanced high frequency micro and nano structures. **
在过去的几年中出现了许多高频技术,提供了有趣的功能。例如,超材料引入了具有自然界中不存在的特性的材料。它们被用于建造在不同频率范围内工作的小型化天线、传感器和滤波器。等离子体器件利用金属-介电界面来引导衍射极限以下的光。这使得光子器件的尺寸更小,从而有望实现光子处理单元的更多集成。提出了用于高频能量采集和视距通信的纳米天线。由于最近太赫兹源和探测器的可用性,太赫兹(THz)应用也出现了。所有这些技术利用的材料,其性质可能取决于源值(非线性),取决于频率(色散),或取决于激发方向(各向异性)。这些特性的不同组合可能存在于这种高频结构中。这些复杂的属性使得对这些设备进行精确建模需要大量的时间和内存。这些结构的优化通常需要估计目标响应相对于所有参数的灵敏度。估计这些灵敏度的经典方法需要对这些时间密集型结构进行反复模拟,这可能是令人望而却步的。***在本提案中,我们将利用我们在伴随灵敏度分析方面的专业知识来开发通用伴随灵敏度方法。这些方法将适用于一般的高频结构,其材料可能表现出非线性、色散和各向异性的任何组合。使用我们的方法,期望的响应或目标函数的灵敏度将被估计使用最多一个额外的模拟,而不管参数的数量。伴随灵敏度将应用于超材料结构、等离子体结构、纳米天线、太赫兹滤波器和频率选择表面的设计优化。我们将开发的伴随技术应用于宽带隐身领域,在该领域,斗篷可以拥有大量可优化的参数。我们还将利用伴随灵敏度分析来提高不同样品的太赫兹成像和光谱的准确性。***拟议的研究涉及加拿大和世界的重要研究领域,包括能量收集、太赫兹医学成像和大型电子物体的宽带隐身。它将产生新技术,加拿大公司将利用这些技术创造新产品或开发现有产品。它也将培养一批高素质的人才(HQP)在建模,设计优化,制造和表征先进的高频微纳米结构。**
项目成果
期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
数据更新时间:{{ journalArticles.updateTime }}
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
Bakr, Mohamed其他文献
Safety and Efficacy of Emergency Ureteroscopy with Intracorporeal Lithotripsy in Patients Presented with Urinary Tract Infection with Mild Sepsis
- DOI:
10.1089/end.2019.0550 - 发表时间:
2020-03-03 - 期刊:
- 影响因子:2.7
- 作者:
Bakr, Mohamed;Abdelhalim, Khaled M. - 通讯作者:
Abdelhalim, Khaled M.
Antenna design exploiting adjoint sensitivity-based geometry evolution
- DOI:
10.1049/iet-map.2012.0374 - 发表时间:
2013-03-19 - 期刊:
- 影响因子:1.7
- 作者:
Ghassemi, Massoud;Bakr, Mohamed;Sangary, Nagula - 通讯作者:
Sangary, Nagula
Dynamic Surrogate Trip-Level Energy Model for Electric Bus Transit System Optimization
- DOI:
10.1177/03611981221100242 - 发表时间:
2022-06-24 - 期刊:
- 影响因子:1.7
- 作者:
Foda, Ahmed;Mohamed, Moataz;Bakr, Mohamed - 通讯作者:
Bakr, Mohamed
Tularemia: The Resurgence of a Diagnostic Challenge and Clinical Dilemma in the United States.
- DOI:
10.7759/cureus.27363 - 发表时间:
2022-07 - 期刊:
- 影响因子:1.2
- 作者:
Kelson, Michael;Burnett, Justin;Girgis, Sameh;Bakr, Mohamed - 通讯作者:
Bakr, Mohamed
Bakr, Mohamed的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('Bakr, Mohamed', 18)}}的其他基金
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2021
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2020
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2018
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2017
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2016
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Efficient modeling and design optimization of computationally intensive high frequency structures
计算密集型高频结构的高效建模和设计优化
- 批准号:
249780-2011 - 财政年份:2015
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Efficient modeling and design optimization of computationally intensive high frequency structures
计算密集型高频结构的高效建模和设计优化
- 批准号:
249780-2011 - 财政年份:2014
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Accuracy improvement of near field microwave scanners
近场微波扫描仪的精度提高
- 批准号:
476918-2014 - 财政年份:2014
- 资助金额:
$ 2.62万 - 项目类别:
Engage Grants Program
Efficient modeling and design optimization of computationally intensive high frequency structures
计算密集型高频结构的高效建模和设计优化
- 批准号:
411963-2011 - 财政年份:2013
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Accelerator Supplements
Efficient modeling and design optimization of computationally intensive high frequency structures
计算密集型高频结构的高效建模和设计优化
- 批准号:
249780-2011 - 财政年份:2013
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
相似国自然基金
Applications of AI in Market Design
- 批准号:
- 批准年份:2024
- 资助金额:万元
- 项目类别:外国青年学者研 究基金项目
基于“Design-Build-Test”循环策略的新型紫色杆菌素组合生物合成研究
- 批准号:
- 批准年份:2021
- 资助金额:0.0 万元
- 项目类别:省市级项目
在噪声和约束条件下的unitary design的理论研究
- 批准号:12147123
- 批准年份:2021
- 资助金额:18 万元
- 项目类别:专项基金项目
相似海外基金
Collaborative Research: SaTC: CORE: Medium: Differentially Private SQL with flexible privacy modeling, machine-checked system design, and accuracy optimization
协作研究:SaTC:核心:中:具有灵活隐私建模、机器检查系统设计和准确性优化的差异化私有 SQL
- 批准号:
2317232 - 财政年份:2024
- 资助金额:
$ 2.62万 - 项目类别:
Continuing Grant
Collaborative Research: SaTC: CORE: Medium: Differentially Private SQL with flexible privacy modeling, machine-checked system design, and accuracy optimization
协作研究:SaTC:核心:中:具有灵活隐私建模、机器检查系统设计和准确性优化的差异化私有 SQL
- 批准号:
2317233 - 财政年份:2024
- 资助金额:
$ 2.62万 - 项目类别:
Continuing Grant
CAREER: Modeling, Optimization, and Equilibrium Formulations for the Analysis and Design of Circular Economy Networks
职业:循环经济网络分析和设计的建模、优化和平衡公式
- 批准号:
2339068 - 财政年份:2024
- 资助金额:
$ 2.62万 - 项目类别:
Continuing Grant
Advanced Statistical Modeling and Optimization Technologies for Yield-Driven Design of High-Frequency Electronic Circuits
用于高频电子电路产量驱动设计的先进统计建模和优化技术
- 批准号:
RGPIN-2017-06420 - 财政年份:2022
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Advanced Statistical Modeling and Optimization Technologies for Yield-Driven Design of High-Frequency Electronic Circuits
用于高频电子电路产量驱动设计的先进统计建模和优化技术
- 批准号:
RGPIN-2017-06420 - 财政年份:2021
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Modeling and Design Optimization of High Frequency Micro and Nano Structures Exploiting Adjoint Sensitivity Analysis
利用伴随灵敏度分析的高频微纳米结构建模和设计优化
- 批准号:
RGPIN-2016-05451 - 财政年份:2021
- 资助金额:
$ 2.62万 - 项目类别:
Discovery Grants Program - Individual
Adaptive, hybrid modeling and optimization for design and control of startup processes
用于设计和控制启动过程的自适应混合建模和优化
- 批准号:
508697-2017 - 财政年份:2021
- 资助金额:
$ 2.62万 - 项目类别:
Collaborative Research and Development Grants
A simulation-based technology for stochastic modeling, sensitivity analysis and design optimization, aimed at development of next-generation micro-fluidic devices for biomedical applications.
一种用于随机建模、灵敏度分析和设计优化的模拟技术,旨在开发用于生物医学应用的下一代微流体设备。
- 批准号:
10323474 - 财政年份:2021
- 资助金额:
$ 2.62万 - 项目类别:
CAREER: Machine-Learning Assisted Process Systems Engineering: Hybrid modeling for process optimization, design and synthesis
职业:机器学习辅助过程系统工程:用于过程优化、设计和合成的混合建模
- 批准号:
1944678 - 财政年份:2020
- 资助金额:
$ 2.62万 - 项目类别:
Continuing Grant
Computational Modeling and Design Optimization Under Uncertainty
不确定性下的计算建模和设计优化
- 批准号:
1000230896-2015 - 财政年份:2020
- 资助金额:
$ 2.62万 - 项目类别:
Canada Research Chairs