GOALI/IUCP: Spline-Based Wavelet Transform for Non-Uniform Rational B-Spline (NURB) Surface Analysis

小行星9634833 这项拨款为一个工业大学合作项目提供资金，该项目涉及样条和小波在CAD建模的表面分析和合成中的应用。 工业合作伙伴将为参与的大学研究人员和学生创造一个机会，在工业专家的指导下解决现实世界的问题。 具体目标是开发和实现一个自主的系统，用于检测和校正表面波纹，使用基于样条的小波变换和基函数，构成设计的表面。 如果这个项目成功，这项研究将导致一个统一的设计数据库绑定到一个单一的共同几何，从而排除任何不必要的返工，在表面设计和消除昂贵的变化，在硬件开发计划。 它还将为航空航天工业带来一个标准的表面计算程序，这将大大减少飞机设计和制造的调度时间和成本。 期望其他行业，特别是汽车，工具和零件，将受益于本研究的曲面分析和合成CAD建模。

9634833 Chui This grant provides funding for an industrial-university collaborative project on applications of splines and wavelets to surface analysis and synthesis for CAD modeling. The industrial partner will create an opportunity for the participating university researchers and students to work on real-world problems under the guidance of industrial experts. The specific goal is to develop and implement an autonomous system for detecting and correcting surface waviness, using a spline-based wavelet transform and basis functions that constitute the designed surface. If this project is successful, this research will lead to a unified design database tied to a single common geometry, thus precluding any unnecessary rework in surface design and eliminating costly changes in the hardware development program. It will also lead to a standard surface calculation procedure for the aerospace industry that will significantly reduce scheduling time and cost for aircraft design and manufacture. It is expected that other industries, particularly automobile, tool, and parts, will benefit from this research on surface analysis and sunthesis for CAD modeling.