Development of stochastic model for the Japanese Islands by combining crust deformation and seismic events

研究背景：由于地震是由地壳应力触发的，因此估计日本群岛地壳中的三维应力分布对于地震危险性和灾害预测至关重要。然而，不可能测量地下10公里深的应力。另一种方法是构造一个随机模型，该模型通过使用概率分布函数来解释应力分布的不确定性；该函数是通过对地壳变形和地震活动的有限测量来定义的。通过对通过测量地壳形变和地震活动积累的数据进行整合，得到一组可接受的随机模型。研究目的：本研究的主要目的是构建存储在日本岛屿地壳中的应力分布的随机模型。通过再现数据…，找到了一组允许的模型更多的是GPS测量的地壳形变和地震台网测量的地震活动。这一套将提供一个能够对未来事件进行预测的一定模型。提出了一种新的随机模型分析方法，从而减少了分析所需的数值计算。研究方法：首先，建立一个物理模型，其构型与实际板材相匹配。利用以概率函数表示的有限应力信息，建立了一个随机模型。研究了在物理模型基础上建立随机模型的一般方法。通过大规模计算的蒙特卡罗模拟确定了一组可接受的模型，并选择了一个最合适的模型作为预测地壳形变和地震活动的原型。主要结果：建立了日本群岛地壳的物理模型，该模型具有最高的空间分辨率，只需大规模并行计算即可进行分析。该物理模型被扩展为一个随机模型，在该模型中，地壳中的三维应力分布是一个概率函数。提出了一种新的函数离散化方法，有效地分析了随机模型的概率行为。利用实测的地壳形变和地震活动资料对随机模型进行了分析。研究了用大规模数值计算分析这一随机模型的潜在有用性。较少

Background of research: The estimation of three-dimensional distribution of stress in the crust of the Japanese Islands is essential for earthquake hazard and disaster prediction, since an earthquake is triggered by crust stress. However, it is impossible to measure stress as deep as 10 kilometer below the ground. An alternative is the construction of a stochastic model which accounts for the uncertainty of the stress distribution by using a probabilistic distribution function; the function is defined by using limited measurement for the curst deformation and the seismic activities. A set of admissible stochastic models are found by integrating data which will be accumulated through measurement of the crust deformation and the seismic activities.Objective of research: The primary of objective of this research is the construction of a stochastic model for the stress distribution which is stored in the crust of the Japanese Island. Aset of admissible models are found by reproducing data … More for the curst deformation that is measured by GPS and for the seismic activities which are measured by seismograph network. This set will provide a certain model which is able to make prediction for future events. Anew analysis method for the stochastic model is developed, so that numerical computation that is required for the analysis is minimized.Methodology of research: First, a physical model which has the configuration that matches the actual plates is constructed. A stochastic model is constructed by using limited information for stress which are expressed in terms of a probabilistic function. Arational method for constructing the stochastic model based on the physical model is studied. A set of admissible models are determined by means of the Monte-Carlo simulation which uses large-scale computation, and a most suitable model is chosen so that it will be a prototype which produces prediction of crust deformation and seismic activities.Major results: A physical model is constructed for the crust of the Japanese Islands, and this model is of highest spatial resolution so that it is analyzed only by a large-scale parallel computation. This physical model is extended to a stochastic model in which three-dimensional distribution of stress in the crust is given as a probabilistic function. An analysis method that uses a new discretization scheme for functions is developed, so that the probabilistic behavior of the stochastic model is efficiently analyzed. The data which are measured for the crust deformation and the seismic activities are used in analyzing the stochastic model. The potential usefulness of analyzing this stochastic model with large-scale numerical computation is studied. Less