课题基金 / 基金详情

Power-Up! Fuelling a new generation of assistive technologies

Power-Up! Fuelling a new generation of assistive technologies
充电!
批准号:
EP/N022971/1
负责人:
Cathy Holloway
金额:
$12.67万
依托单位:
依托单位国家:
英国
项目类别:
Research Grant
财政年份:
2016
资助国家:
英国
项目状态:
已结题
起止时间:
2016 至 --

项目摘要

项目成果

Cathy Holloway的其他基金

相似基金

相关文献

中文摘要
翻译
通电的目的!是对自动推进轮椅的人使用的现有动力附加组件进行改造,以便提供最佳比例辅助,并采用燃料电池技术来大幅减轻设备的重量。这将对那些自我推动的人和那些目前由照顾者推动的人都有相当大的好处,因为它将增加一个人推动自己的能力,减轻照顾者的负担,并增加轮椅使用者的独立性。这一研究思路既源于终端用户的需求,也源于三个领域的技术进步:1)为手动轮椅用户开发一种轻量力传感手环(SenseWheel);2)比例动力辅助模型;3)混合动力源开发,结合新的低成本、高性能燃料电池技术。该项目的一个关键部分将是从技术(使用驱动循环方法)和用户需求的角度确定系统的需求。轮椅用户的平均年龄为57岁,超重/肥胖,有长期的健康状况,并在某种程度上依赖照顾者[5]。英国有700万照顾者。其中,120万护理者因护理而遭受身体伤害,超过一半的护理者因精神和/或身体健康问题而不得不停止护理。超过50%的照顾者是被照顾者的配偶/伴侣,65%的照顾者本身超重或肥胖。很明显,护理人员在照顾轮椅使用者方面遇到了身体上的困难。另一端是24万活跃的轮椅使用者,他们忙于进行日常活动[2];上班,接孩子放学等等。每推一次,他们的肩膀就会进一步磨损,最终,几乎所有人都会上肢受伤,有些人严重到无法独立推动自己。伤害被认为部分是由于轮椅推推周期的周期性[6]、[7],并被轮椅推推的低总机械效率所激怒--只有10%的力气直接让人向前移动[8],这是在推动平坦、光滑的表面时,如医院床垫。在更具挑战性的表面上,如斜坡、横坡和粗糙或松散的表面(如砾石),推力会大得多。为了表明问题的严重程度:据报道,肩痛的发生率从42%[9]到66%[10],最常见的损伤是肩袖肌肉损伤[11]。整个工作流程如图1所示。最初的工作包将使用当前ARCCS项目(EP/L023849/11 Dr.Holloway is Co-I)中开发的工具,并对其进行进一步改进,以自动生成探头来帮助理解用户需求。WP1的结果将有助于了解帕梅拉设施以及户外路线将执行的具体任务。最近发明的SenseWheels将被用来测量WP3期间推力的生物力学。这些信息将告知人们在使用动力辅助装置推动轮椅时产生的肩部力。同时,我们将使用一套定制的传感器来收集商业上可买到的SmartDrive车轮的电力消耗。WP3将用于构建已在WP1中进行的日常旅行的驾驶周期。此外,将通过比较外部路线的实际能耗和Pamela Micro-Trips预测的能耗来验证使用Micro-Trips的过程。WP2的结果将被用于新的混合燃料电池系统(WP3)和比例控制系统(WP4)的规格。最终的设计将在伊丽莎白女王奥林匹克公园进行试验。该项目得到了伦敦遗产发展公司的支持,并与已经授予的博士生名额密切相关,并将与这笔赠款重叠。
英文摘要
The aim of Power-Up! is to adapt an existing power add-on used by people who self-propel their wheelchairs so that it provides an optimal level of proportional assistance and incorporates fuel cell technology to drastically reduce the weight of the device. This will have considerable benefits both for those who self-propel and those currently pushed by a carer as it will increase a person's ability to push themselves, reducing the burden on carers and increasing the independence of wheelchairs users. The research idea has derived both from end-user demand and also technological advances in three areas: 1) The development of a light-weight force-sensing handrim for manual wheelchair users (the SenseWheel); 2) a model of proportional power assistance; 3) hybrid power source development incorporating a new low-cost, high-performance fuel cell technology. A key part of the project will be in determining requirements of the system from a technology (using a drive cycle method) and user-needs perspectives.The average wheelchair user is an overweight/obese 57 years old with a long-term health condition and dependent in some way on a carer [5]. There are seven million carers in the UK. Of those, 1.2 million carers have suffered a physical injury due to caring and over half have had to stop giving care due to mental and/or physical health complaints. Over 50% of carers are the spouse/partner of the person being cared for and 65% are themselves overweight or obese. It is clear that carers are struggling physically to care for wheelchair users [5]. At the other end of the spectrum are the 240,000 active wheelchair users who are busy getting on with their daily activities [2]; going to work, collecting their children from school, etc. With each push they further wear their shoulder and eventually, nearly all will have upper limb injuries, some so severe they will be unable to independently push themselves. Injuries are thought to arise in part to the cyclical nature of the wheelchair push cycle [6], [7] and are exasperated by the low gross mechanical efficiency of wheelchair pushing - only 10% of effort goes directly into making a person move forwards [8]and this is when pushing along flat, smooth surfaces such as hospital lino. On more challenging surfaces such as slopes, cross-slopes and rough or loose surfaces (e.g. gravel) the push forces will be much higher .To give an indication of scale of the problem: the incidence of shoulder pain is reported to range from 42% [9] to 66% [10], with the most commonly reported injury damage to the rotator cuff muscles [11]. The overall workflow is given in Figure 1. The initial work package will use the tools developed in current ARCCS project (EP/L023849/11 Dr. Holloway is Co-I) and further improve these to automatically produce probes to help understand user needs. The results from WP1 will help inform the specific tasks to be conducted at the PAMELA facility as well as the outdoor route. The recently invented SenseWheel will be used to measure the biomechanics of pushing during WP3. These will inform the shoulder forces which are occurring as people push their wheelchair with a power-assist device.In tandem we will collect the power consumption of the commercially available SmartDrive wheel, using a bespoke set of sensors. WP3 will be used to construct drive cycles of everyday journeys, which have been undertaken in WP1. Furthermore, the process of using micro-trips will be validated by comparing the actual power consumption during an outside route and the one predicted by the PAMELA micro-trips. The results of WP2 will be used to inform the specification of the new hybrid fuel cell system (WP3) and the proportional control system (WP4). The final design will be trialled at the Queen Elizabeth Olympic Park. The project is supported by the London Legacy Development Corporation as well as being closely linked to a PhD studentship,which is already awarded and will overlap with this grant.
期刊论文(10)
专著(0)
科研奖励(0)
会议论文
DOI: 10.1016/j.enconman.2021.114924
发表时间: 2021-12
期刊: Energy Conversion and Management
影响因子: 10.4
作者: [V. S. Bethapudi;J. Hack;G. Hinds;P. Shearing;D. Brett;M. Coppens]
通讯作者: V. S. Bethapudi;J. Hack;G. Hinds;P. Shearing;D. Brett;M. Coppens
DOI: 10.1016/j.jpowsour.2018.02.022
发表时间: 2018-04
期刊: Journal of Power Sources
影响因子: 9.2
作者: [Erik Engebretsen;G. Hinds;Q. Meyer;T. Mason;E. Brightman;L. Castanheira;P. Shearing;D. Brett]
通讯作者: Erik Engebretsen;G. Hinds;Q. Meyer;T. Mason;E. Brightman;L. Castanheira;P. Shearing;D. Brett
DOI: 10.1016/j.jpowsour.2019.04.018
发表时间: 2019-06
期刊: Journal of Power Sources
影响因子: 9.2
作者: [N. Kulkarni;M. Kok;R. Jervis;F. Iacoviello;Q. Meyer;P. Shearing;D. Brett]
通讯作者: N. Kulkarni;M. Kok;R. Jervis;F. Iacoviello;Q. Meyer;P. Shearing;D. Brett
DOI: 10.1039/d1ta00633a
发表时间: 2021-03
期刊: Journal of Materials Chemistry A
影响因子: 11.9
作者: [M. P. Browne;J. Dodwell;F. Novotný;Sonia Jaskaniec;P. Shearing;V. Nicolosi;D. Brett;M. Pumera]
通讯作者: M. P. Browne;J. Dodwell;F. Novotný;Sonia Jaskaniec;P. Shearing;V. Nicolosi;D. Brett;M. Pumera
共 8 条
    Inclusive Public Activities for information and Communication Technologies (IPACT)
    • 批准号:
      EP/W033674/1
    • 项目类别:
      Research Grant
    • 资助金额:
      $25.62万
    • 财政年份:
      2022
    • 负责人:
      Cathy Holloway
    • 依托单位:
    Transformative Innovation in the Delivery of Assisted Living products and services (TIDAL)
    • 批准号:
      EP/W000717/1
    • 项目类别:
      Research Grant
    • 资助金额:
      $120.92万
    • 财政年份:
      2021
    • 负责人:
      Cathy Holloway
    • 依托单位:
    国内基金
    海外基金
    长链非编码RNA 6up促进BHV-1在MDBK细胞中增殖的分子机制
    • 批准号:
      32473006
    • 项目类别:
      面上项目
    • 资助金额:
      50.00万元
    • 批准年份:
      2024
    • 负责人:
      吴文学
    • 依托单位:
    “Bottom-up”策略构筑金属纳米粒子-多孔有机聚合物复合催化材料
    • 批准号:
      --
    • 项目类别:
      地区科学基金项目
    • 资助金额:
      33万元
    • 批准年份:
      2022
    • 负责人:
      张勇
    • 依托单位:
    碳锰双功能催化剂低温协同脱除烧结烟气NOx与UP-POPs研究
    • 批准号:
      --
    • 项目类别:
      面上项目
    • 资助金额:
      54万元
    • 批准年份:
      2022
    • 负责人:
      苏伟
    • 依托单位:
    基于MS/MS和UP-MMCA的新生儿甲基丙二酸血症二阶筛查新方法构建与临床应用研究
    • 批准号:
      82101824
    • 项目类别:
      青年科学基金项目(C类)
    • 资助金额:
      30.0万元
    • 批准年份:
      2021
    • 负责人:
      王旭东
    • 依托单位: