Scalable nanomanufacturing of 2D layered materials and their integration into nano-enabled systems

该提案概述了2D材料的可扩展纳米制造及其功能集成到受益于纳米尺寸缩放的系统和设备的研究计划。2D纳米材料捕捉到了原子尺寸效应的本质，可以从机械性能、电导率和热导率、高表面积和独特的量子力学效应等多种应用中受益。然而，它们在日常生活中的全部潜力受到当前制造方法的限制，这些方法在质量或数量上都有妥协。该计划旨在通过研究最近构思的可压缩流剥离（CFE）来解决自上而下加工的2D材料系统的生产规模的基本科学和应用问题，CFE是一种连续和高通量的方法，用于使用超音速流机械剥离2D层状材料。 拟议的研究计划旨在阐明基本的加工结构性能关系CFE是必要的任何板凳到地板的过渡。该方法将包括（1）使用理论和数值工具，结合实验观察来建立剥离机制，（2）优化完全连续操作的处理和后处理条件，（3）展示CFE处理的2D纳米材料在纳米启用系统中的可行应用，如柔性电子，热管理和合成珍珠层系统。通过这项工作，将涉及总共10个HQP（4个MS，2个博士和4个UG），围绕（i）2D材料破碎理论，（ii）处理时间对2D材料质量的影响，以及（iii）2D材料的连续，快速和环保处理的几个现有知识差距将得到解决。 到目前为止，石墨烯和其他2D纳米材料的前景还没有实现，因为实验室与工厂之间存在重大脱节。最近的一项研究（Kauling et al. 2018 in Advanced Materials）检查了来自60家供应商的“石墨烯”，发现大多数只是昂贵的研磨石墨，平均只有10%的产品是10个原子层或更少。这些纯粹的商业，烟雾和镜子的风险投资正在从基本的R& 2D材料的可扩展纳米制造仍然需要D努力，导致要求国际标准组织（ISO）和英国国家物理实验室等组织制定产品认证标准。关于2D材料的可扩展纳米制造及其集成到纳米系统的拟议研究计划将依赖于2D材料科学，可压缩气体动力学，胶体表面科学和复合材料设计原理的既定和新兴概念。它将通过随后的研发以及HQP的技能和经验培训，使加拿大的自然资源和制造业受益。

This proposal outlines a research program on the scalable nanomanufacturing of 2D materials and their functional integration into systems and devices that benefit from nano-size scaling. 2D nanomaterials capture the essence of atomic-size effects, and can benefit a diverse range of applications from mechanical properties, electrical and thermal conductivities, high surface areas and unique quantum-mechanical effects. However, their full potential in everyday life is limited by the current methods of fabrication which compromise either quality or quantity. The proposed program seeks to address fundamental scientific and applied issues in production scaling of top-down processed 2D material systems by researching the recently conceived compressible flow exfoliation (CFE), which is a continuous and high-throughput method for mechanically exfoliating 2D layered materials using supersonic flows. The proposed research program seeks to elucidate the fundamental processing-structure-property relations regarding CFE that are necessary for any bench-to-floor transition. The approach will consist of (1) using theory and numerical tools, coupled with experimental observations to establish the exfoliation mechanism, (2) optimize the processing and post-processing conditions for fully continuous operations, (3) demonstrate feasible applications of CFE processed 2D nanomaterials in nano-enabled systems such as flexible electronics, thermal management and synthetic-nacre systems. Through this work, which will involve a total of 10 HQP (4 MS, 2 PhD and 4 UG), several existing knowledge gaps surrounding the (i) theory of 2D material fragmentation, (ii) effect of treatment time on 2D material quality, and (iii) continuous, rapid and environmentally friendly processing of 2D materials will be addressed. The promise of graphene and other 2D nanomaterials has not delivered thus far, because of a major disconnect between what's happening in the lab vs. the factory floor. A recent study (Kauling et al. 2018 in Advanced Materials) examined "graphene" from 60 suppliers and found that most were just expensive milled graphite and that on average only 10% of the product was 10 atomic layers or less. These purely commercial, smoke-and-mirror ventures are detracting from the fundamental R&D efforts that are still needed in scalable nanomanufacturing of 2D materials resulting in calls for developing standards for product qualification from organizations like International Organization of Standards (ISO) and the UK's National Physical Laboratory. The proposed research program on scalable nanomanufacturing of 2D materials and their integration into nano-enabled systems will rely on established as well as emerging concepts from 2D materials science, compressible gas dynamics, colloid surface science and composites design principles. It will benefit the Canadian natural resources and manufacturing sectors through the ensuing R&D and the skills and experience training of HQP.