Stakeholder Perspectives on the Current and Future of Additive Manufacturing in Healthcare.
Stakeholder Perspectives on the Current and Future of Additive Manufacturing in Healthcare.
复制标题
DOI：
10.18063/ijb.v8i3.586
复制
发表时间：
2022
影响因子：
8.4
通讯作者：
Cox, Sophie
中科院分区：
文献类型：
--
作者：
Villapun, Victor M.;Carter, Luke N.;Avery, Steven;Gonzalez-Alvarez, Alba;Andrews, James W.;Cox, Sophie
添加制造(AM)技术使新的设计和功能成为可能，从而扰乱了许多供应链。实现复杂定制结构的机会在医疗保健领域引起了极大的兴趣；然而，充分利用关键需要整个供应链的协调。为了提供对这一过程的见解，进行了一项调查，以了解不同医疗AM利益相关者的观点。研究结果强调了学者、设计师、制造商和医学专家之间的共识，即个性化和设计控制是AM的主要优势有趣的是，表面光洁度一直被认为是一个障碍。然而，人们在一定程度上接受了后处理对于实现适当的质量控制是必要的。有人建议扩大使用现场过程监测系统，以支持提高再现性。强调了利益攸关方群体与每个利益攸关方所关注的发展领域之间在AM未来愿景方面的差异。总体而言，这项调查表明，医疗利益相关者同意AM的能力，但对其实施和进展有不同的优先事项。这在一定程度上突显了基层供应链之间的脱节；因此，建议在AM特定标准上进行合作，并从项目开始就加强利益攸关方之间的沟通。
Additive manufacturing (AM) technologies have disrupted many supply chains by making new designs and functionalities possible. The opportunity to realize complex customized structures has led to significant interest within healthcare; however, full utilization critically requires the alignment of the whole supply chain. To offer insights into this process, a survey was conducted to understand the views of different medical AM stakeholders. The results highlighted an agreement between academics, designers, manufacturers, and medical experts, that personalization and design control are the main benefits of AM. Interestingly, surface finish was consistently identified as an obstacle. Nevertheless, there was a degree of acceptance that post-processing was necessary to achieve appropriate quality control. Recommendations were made for extending the use of in situ process monitoring systems to support improved reproducibility. Variations in the future vision of AM were highlighted between stakeholder groups and areas of interest for development noted for each stakeholder. Collectively, this survey indicates that medical stakeholders agree on the capabilities of AM but have different priorities for its implementation and progression. This highlights a degree of disconnection among the supply chain at a ground level; thus, collaboration on AM specific standards and enhancement of communication between stakeholders from project inception is recommended.
登录
查看更多内容
影响因子：
3.7
作者：
Di Prima, Matthew;Coburn, James;Ricles, Laura
通讯作者：
Ricles, Laura
DOI：
10.1016/j.techfore.2017.01.006
发表时间：
2017-04-01
影响因子：
12
作者：
Jiang, Ruth;Kleer, Robin;Piller, Frank T.
通讯作者：
Piller, Frank T.
DOI：
10.1016/j.jmrt.2020.04.062
发表时间：
2020-07-01
影响因子：
6.4
作者：
Colorado, Henry A.;Velasquez, Elkin I. Gutierrez;Monteiro, Sergio Neves
通讯作者：
Monteiro, Sergio Neves
影响因子：
2.2
作者：
Hull, Charles W.
通讯作者：
Hull, Charles W.
DOI：
10.1016/j.msec.2016.04.006
发表时间：
2016-07-01
影响因子：
7.9
作者：
Cox, Sophie C.;Jamshidi, Parastoo;Grover, Liam M.
通讯作者：
Grover, Liam M.