Electrical properties and microstructures of (Zn and Nb) co-doped BaTiO3 ceramics prepared by microwave sintering

Electrical properties and microstructures of (Zn and Nb) co-doped BaTiO3 ceramics prepared by microwave sintering
复制标题

微波烧结制备(Zn、Nb)共掺杂BaTiO3陶瓷的电性能和微观结构

DOI:
10.1016/j.ceramint.2016.01.123
复制
发表时间:
2016-05
影响因子:
5.2
通讯作者:
Yan Yan
Yan Yan
中科院分区:
材料科学1区
文献类型:
--
作者:
Yun Yang;Kaihua Liu;Xiaokui Liu;Gang Liu;Chengjie Xia;Zhanbing He;Yan Yan

文献摘要

参考文献

被引文献

相似文献

微波烧结成功地在短保温时间内制备了(Zn,Nb)共掺杂BT陶瓷。检测到四方 BT 是所有样品的主要相。随着ZnNb2O6添加量的增加,Ba2Ti5O12被检测为第二相。 ZnNb2O6与BaTiO3形成固溶体,能有效抑制晶粒长大。铌和锌的共掺杂引起核壳不均匀结构,导致介电常数峰变宽,并向较低温度移动。 ZnNb2O6(小于4.5%)的引入不仅有助于提高致密化,而且有助于降低介电损耗。
Microwave sintering was successfully applied to prepare (Zn, Nb) co-doped BT ceramics in short soaking time. Tetragonal BT was detected as the major phase for all the samples. With increasing ZnNb2O6addition, Ba2Ti5O12was detected as the second phase. ZnNb2O6formed a solid solution with BaTiO3, which is effective to inhibit grain growth. The co-doping with Nb and Zn induced core–shell inhomogeneous structures, resulting in broadened permittivity peaks shifting to lower temperature. The introduction of ZnNb2O6(less than 4.5%) was not only useful to enhance the densification, but also helpful to decrease the dielectric loss.
DOI: 10.1016/s0955-2219(97)00184-2
发表时间: 1998
影响因子: 5.7
作者:
F. Azough;R. AL-Saffar;R. Freer
通讯作者: F. Azough;R. AL-Saffar;R. Freer
DOI: 10.1016/s0955-2219(01)00347-8
发表时间: 2001
影响因子: 5.7
作者:
V. Mitić;I. Mitrovic
通讯作者: V. Mitić;I. Mitrovic
DOI: 10.1111/j.1551-2916.2009.03104.x
发表时间: 2009-08-01
影响因子: 3.9
作者:
Ogihara, Hideki;Randall, Clive A.;Trolier-McKinstry, Susan
通讯作者: Trolier-McKinstry, Susan
DOI: 10.1557/s0883769400053410
发表时间: 1999-11
期刊: MRS Bulletin
影响因子: 5
作者:
Michel L. Trudeau
通讯作者: Michel L. Trudeau
DOI: 10.2109/jcersj.115.360
发表时间: 2007
影响因子: 1.1
作者:
Y. Mizuno;T. Hagiwara;H. Kishi
通讯作者: Y. Mizuno;T. Hagiwara;H. Kishi