Tribological behavior of VC/Ni multilayer coatings prepared by non-reactive magnetron sputtering
Tribological behavior of VC/Ni multilayer coatings prepared by non-reactive magnetron sputtering
复制标题
非反应磁控溅射制备VC/Ni多层涂层的摩擦学行为
DOI：
10.1016/j.triboint.2015.10.019
复制
发表时间：
2016-07
期刊：
影响因子：
--
通讯作者：
黄峰
中科院分区：
文献类型：
--
作者：
葛芳芳;周小军;孟凡平;薛群基;黄峰
陶瓷-金属多层涂层由于金属相和陶瓷相的有吸引力的组合，通常表现出显著增强的耐磨性。采用非反应磁控溅射法制备了VC/Ni多层膜。通过球-板干滑动试验研究了涂层的摩擦学行为，然后对磨损表面进行了深入的显微镜检查。VC/Ni多层涂层的磨损率为10− 15 m3/Nm，与M2工具钢相比降低了一个数量级。结果表明，涂层的磨损过程受调制周期的影响，并进一步表明，为优化陶瓷-金属多层涂层的耐磨性，需要有足够厚度的硬质层来提高涂层的抗变形能力。
Ceramic–metal multilayer coatings generally exhibit considerably enhanced wear resistance, due to an attractive combination of metal and ceramic phases. In this work, VC/Ni multilayer coatings were prepared with non-reactive magnetron sputtering. Tribological behavior of the coatings was investigated by ball-on-plate dry sliding tests, followed by in-depth microscopic examination of the worn surfaces. The VC/Ni multilayer coatings exhibited the wear rates of 10−15m3/N m that was lowered by one order of magnitude in comparison with M2 tool steel. The results revealed that the wear process of coatings was influenced by the modulation period, and might further indicate that a sufficient thickness of hard layers was required to enhance the deformation resistance for optimizing the wear resistance of ceramic–metal multilayer coatings.
登录
查看更多内容
影响因子：
3.2
作者：
M. Daia;P. Aubert;S. Labdi;C. Sant;F. Sadi;P. Houdy;Jean-Luc Bozet
通讯作者：
M. Daia;P. Aubert;S. Labdi;C. Sant;F. Sadi;P. Houdy;Jean-Luc Bozet
影响因子：
5.4
作者：
M. Berger;U. Wiklund;M. Eriksson;H. Engqvist;S. Jacobson
通讯作者：
M. Berger;U. Wiklund;M. Eriksson;H. Engqvist;S. Jacobson
影响因子：
4.7
作者：
Q. Yang;L. Zhao
通讯作者：
Q. Yang;L. Zhao
影响因子：
2.2
作者：
C. Santafé;C. Borgianni
通讯作者：
C. Santafé;C. Borgianni
DOI：
10.1116/1.581273
发表时间：
1998-10
期刊：
Journal of Vacuum Science and Technology
影响因子：
--
作者：
E. Kusano;Masaru Kitagawa;H. Nanto;A. Kinbara
通讯作者：
E. Kusano;Masaru Kitagawa;H. Nanto;A. Kinbara