Effect analysis of the residual error evaluation method used in bonnet polishing process for aspheric lens
Effect analysis of the residual error evaluation method used in bonnet polishing process for aspheric lens
复制标题
非球面透镜阀盖抛光过程中残余误差评价方法的效果分析
DOI：
10.1007/s00170-013-5217-1
复制
发表时间：
2013-08
影响因子：
3.4
通讯作者：
Guo, Y.
中科院分区：
文献类型：
--
作者：
Pan, R.;Peng, Y.;Liang, K.;Guo, Y.
研究了阀盖抛光过程中残余误差评定方法对轴对称非球面加工精度的影响。以往对非球面法向误差的研究很少，在BP中的应用更是少之又少。本文提出了一种基于非球面轴向误差（AE）计算NE的新方法。通过对四个非对称非球面透镜的实验，对它们进行了比较。测试了声发射作为BP过程中残余误差对最终表面精度的影响。结果表明，这将导致实际最终曲面形状与理论最终曲面形状存在差异，因此在BP过程中应采用NE作为残余误差。
The purpose of this paper is to investigate the effect of the residual error evaluation method used in bonnet polishing (BP) process to the axisymmetric aspheric surface accuracy. In the past, few attentions have been paid to the normal direction error (NE) of the aspheric surface, not to mention its application in BP. In this paper, a new approach is proposed to calculate NE on the basis of the axis direction error (AE) of the aspheric surface. The comparison of them is presented through a group of experiments on four asxisymmetric aspheric lenses. The effect of using AE as the residual error in BP process to the final surface accuracy is tested. It is confirmed that it would result in the difference between the practical final surface form and the theoretical final surface form, and NE should be used as the residual error in BP process.
登录
查看更多内容
影响因子：
3.8
作者：
Hongwei Jing;C. King;D. Walker
通讯作者：
Hongwei Jing;C. King;D. Walker
影响因子：
5.6
作者：
Lee, Dong-Hyeok
通讯作者：
Lee, Dong-Hyeok
DOI：
10.1007/s00170-012-4347-1
发表时间：
2012-07
期刊：
The International Journal of Advanced Manufacturing Technology
影响因子：
--
作者：
Chen Jiang;Yinbiao Guo;Haolin Li
通讯作者：
Chen Jiang;Yinbiao Guo;Haolin Li
DOI：
10.1007/s00170-008-1615-1
发表时间：
2009-05
期刊：
The International Journal of Advanced Manufacturing Technology
影响因子：
--
作者：
Adam Woźniak;J.R.R. Mayer;M. Balazinski
通讯作者：
Adam Woźniak;J.R.R. Mayer;M. Balazinski
DOI：
10.1117/12.22344
发表时间：
1990-10
期刊：
--
影响因子：
--
作者：
P. Hall
通讯作者：
P. Hall