Communication—Electrochemical Atomic Layer Etching of Copper

Communication—Electrochemical Atomic Layer Etching of Copper
复制标题

通信 – 铜的电化学原子层蚀刻

DOI:
10.1149/2.0901807jes
复制
发表时间:
2018
影响因子:
3.9
通讯作者:
Akolkar, Rohan
Akolkar, Rohan
中科院分区:
工程技术4区
文献类型:
--
作者:
Gong, Yukun;Venkatraman, Kailash;Akolkar, Rohan

文献摘要

参考文献

被引文献

相似文献

提出了一种新的铜(Cu)电化学原子层刻蚀(e-ALE)工艺。在这个过程中,Cu首先经历表面有限的硫化,形成一层硫化铜(cu2s)。然后在盐酸中选择性地蚀刻cu2s层,而不蚀刻下面的Cu。铜的表面有限硫化和Cu 2 S的选择性蚀刻步骤依次重复,以实现每个e-ALE循环的净蚀刻速率接近一个Cu单层。表面限制蚀刻显示,以尽量减少粗糙度放大,从而保持原始铜电极的近原子平面。
A novel process for the electrochemical atomic layer etching (e–ALE) of copper (Cu) is presented. In this process, Cu first undergoes surface-limited sulfidization to form a monolayer of copper sulfide (Cu 2 S). The Cu 2 S layer is then selectively etched in hydrochloric acid without etching the underlying Cu. The steps of surface-limited sulfidization of Cu and selective etching of the resulting Cu 2 S are repeated sequentially to achieve a net etch rate of close to one Cu monolayer etched per e–ALE cycle. Surface-limited etching is shown to minimize roughness amplification thereby preserving the near-atomic flatness of the original Cu electrode.
DOI: --
发表时间: 1994
期刊:
影响因子: --
作者:
L. Colletti;Daniel Teklay;J. Stickney
通讯作者: J. Stickney
晶体溶解过程中单个原子扭结的动力学
DOI: --
发表时间: 2000
期刊:
影响因子: --
作者:
Magnussen Om;Vogt Mr
通讯作者: Vogt Mr
DOI: 10.1016/j.mee.2006.08.012
发表时间: 2007
影响因子: 2.3
作者:
P. Tamirisa;G. Levitin;N. Kulkarni;D. Hess
通讯作者: D. Hess
碱性溶液中Cu(111)电极上硫吸附层的结构
DOI: --
发表时间: 2003
期刊:
影响因子: --
作者:
M. Sugimasa;J. Inukai;K. Itaya
通讯作者: K. Itaya
铜的电化学原子层沉积:通过表面限制氧化还原取代欠电势沉积锌介导的无铅工艺
DOI: --
发表时间: 2016
期刊:
影响因子: --
作者:
K. Venkatraman;Ryan R. Gusley;Lung;Y. Dordi;R. Akolkar
通讯作者: R. Akolkar