Hydraulic Model Data for Two-Dimensional Dam-Break Flows

这项工作将利用1：50的比例尺 长坝的物理模型，包括上游的一部分， 水库和下游河流，在赞助下建造的， 华盛顿水力公司，目前已被用于确定 发电站的最高水位，以防大坝倒塌。 的 测试程序将通过同时测量而稍微修改 在16个地点（而不是一个或两个）的水位， 精密电容探头。 测试将至少重复一次。 波阵面的传播将使用高速 摄像头，两岸的最高水位将被记录下来， 高速摄像机，两岸的最高水位将是 测定了 记录在磁带上的完整数据集将被制成 提供给感兴趣的工程师和科学家。 该项目的目的是生产质量目前没有 现有的实验室数据将用于开发新的两种- 三维数学模型，并在验证现有的 模拟溃坝波的产生和传播的模型。 这项工作将在Albrook液压实验室进行，华盛顿 州立大学，全国最大的大学之一。 私家侦探是高度 有资格执行这个项目。 因此， 推荐

This work will take advantage of the availability of a 1:50 scale physical model of the Long Dam that includes part of the upstream reservoir and the downstream river, built under the sponsorship of the Washington Water power Co., and presently been used to determine the maximum water levels at the powerhouse in case the dam fails. The testing program will be modified slightly by measuring simultaneously the water levels at sixteen locations (instead of one or two) using precision capacitance probes. The tests will be repeated at least once. The propagation o> the wave front will be recorded using a high-speed camera, and maximum water levels on both banks will be recorded using a high-speed camera, and maximum water levels on both banks will be measured. The complete data set recorded in magnetic tape will be made available to interested engineers and scientists. The purpose of this project is to produce quality currently not available, laboratory data to be used in the development of new two- dimensional mathematical models, and in the validation of existing models that simulate the generation and propagation of dam-break waves. The work will be conducted at the Albrook Hydraulic Lab., Washington State University, one of the largest in the country. The P.I. is highly qualified to carry out this project. Consequently an award is recommended.