U.S.-Korea Cooperative Research On Autoclave Resin Transfer Molding (ARTM) in High Performance Polymeric Composite Recycling

美韩合作研究高性能聚合物复合材料回收中的高压釜树脂传递模塑成型 (ARTM)

• 批准号: 9314437
• 负责人: James Seferis
• 金额: $ 2.14万
• 依托单位: University of Washington
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 1994
• 资助国家: 美国
• 起止时间: 1994-08-15 至 1999-07-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9314437&HistoricalAwards=false
• 关键词: U.S.; Korea; Cooperative; Research; Autoclave

9314437 Seferis This award provides funds to permit Dr. James C. Seferis, Department of Chemical Engineering, University of Washington, to pursue with Dr. Ki-Jun Lee, Department of Chemical Engineering, Seoul National University, Korea, for 24 months, a program of cooperative research on autoclave resin transfer molding (ARTM) in high performance polymeric composite recycling. Specifically, the proposed research will focus on (1) ARTM feasibility studies and process development, (2) resin flow modeling and processing parameter characterization, (3) void formation phenomena in ARTM processing, and (4) ARTM composite recycle studies. This project will be integrated into an overall processing-structure-property characterization methodology facilitating composites technology transfer in aerospace, automotive, and electric/electronic industries. Composite recycling has recently emerged in aerospace industries as a critical issue resulting from serious concerns for cost savings and environmental health problems. The expertise of Dr. Lee's team at Seoul National University in polymer rheology and porous media transport phenomena will be combined, for mutual benefit, with that of the PI's research team which is studying process induced stresses in laminated polymer composites and related problems in composite manufacture. The collaborators are recognized as experts in the field of the proposal. This project is relevant to the objectives of the U.S.-Korea Cooperative Science Program which seeks to increase the level of cooperation between U.S. and Korean scientists and engineers through the exchange of scientific information, ideas, skills, and techniques and through collaboration on problems of mutual benefit. Korean participation in the project is supported by the Korea Science and Engineering Foundation (KOSEF). This project adds an international cooperative dimension to the PI's research under NSF Grant No. DDM-9245052. ***

小行星9314437 该奖项提供资金，允许詹姆斯C。华盛顿大学化学工程系的Seferis博士与韩国首尔国立大学化学工程系的Ki-Jun Lee博士合作开展为期24个月的高压釜树脂传递模塑（ARTM）在高性能聚合物复合材料回收中的合作研究。 具体而言，拟议的研究将集中在（1）ARTM可行性研究和工艺开发，（2）树脂流动建模和工艺参数表征，（3）ARTM工艺中的空隙形成现象，以及（4）ARTM复合材料回收研究。 该项目将被整合到一个整体的工艺-结构-性能表征方法中，以促进航空航天，汽车和电气/电子行业的复合材料技术转移。 复合材料回收利用最近在航空航天工业中成为一个关键问题，这是由于对节约成本和环境健康问题的严重关切。 首尔国立大学的Lee博士团队在聚合物流变学和多孔介质传输现象方面的专业知识将与PI研究团队的专业知识相结合，以实现互利，PI研究团队正在研究层压聚合物复合材料中的工艺诱导应力和复合材料制造中的相关问题。 合作者被公认为提案领域的专家。 该项目与美国的目标有关-韩国合作科学计划，旨在通过科学信息，思想，技能和技术的交流以及通过互利问题的合作来提高美国和韩国科学家和工程师之间的合作水平。 韩国对该项目的参与得到了韩国科学和工程基金会的支持。 这个项目增加了国际合作的层面，PI的研究下，美国国家科学基金会批准号DDM-9245052。 ***