NSF/IEEE/RIA Workshop on Research Needs in Robotics and Intelligent Machines for Emerging Industrial Applicaitons; October 28, 1996; Albuquerque, New Mexico

NSF/IEEE/RIA 关于新兴工业应用的机器人和智能机器研究需求研讨会；

• 批准号: 9612768
• 负责人: George Bekey
• 金额: $ 2万
• 依托单位: University of Southern California
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 1996
• 资助国家: 美国
• 起止时间: 1996-10-01 至 1997-09-30
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9612768&HistoricalAwards=false
• 关键词: NSF; IEEE; RIA; Workshop; Research

IRI-9612768 This award funds a research-planning workshop that is intended to discuss promising new and emerging applications for robotics, and to identify research needs to facilitate the realization of those applications. The workshop is co-sponsored by the Robotics Industries Association and by the IEEE Robotics and Automation Society. It is be held in Santa Fe, New Mexico, in November 1996. The Robotics and Machine Intelligence Program of NSF has long had a strategic objective of supporting research that would enhance robotics system performance and usability, thereby gaining acceptance and adoption of robotics technologies across a broad spectrum of application domains. The workshop aims to establish or enhance connections between technology researcher/developers and potential end users, leading to stimulation of research of increased strategic value. Thus, the design of the workshop includes involvement of lots of industry participants, primarily representing end-users, with a few robotics vendors, and a number of academic researchers. Discussion groups will address needs identification, research identification, and research transition. Several planned publications from the workshop should assure wide dissemination of the findings and recommendations.

IRI-9612768 该奖项资助一个研究规划研讨会，旨在讨论有前景的机器人技术新兴应用，并确定促进这些应用实现的研究需求。 该研讨会由机器人工业协会和 IEEE 机器人与自动化协会共同主办。 它于 1996 年 11 月在新墨西哥州圣达菲举行。长期以来，NSF 机器人和机器智能计划的战略目标是支持提高机器人系统性能和可用性的研究，从而在广泛的应用领域获得机器人技术的接受和采用。 该研讨会旨在建立或加强技术研究人员/开发人员与潜在最终用户之间的联系，从而刺激增加战略价值的研究。 因此，研讨会的设计包括许多行业参与者的参与，主要代表最终用户，以及一些机器人供应商和一些学术研究人员。 讨论小组将讨论需求识别、研究识别和研究过渡。 研讨会计划出版的几份出版物应确保调查结果和建议得到广泛传播。