Workshop: Blue Skies Manufacturing Workshop at the 2019 MSEC/NAMRC; Erie, Pennsylvania; June 10-14, 2019

研讨会：2019 MSEC/NAMRC 的蓝天制造研讨会；

• 批准号: 1840276
• 负责人: Zhijian Pei
• 金额: $ 5万
• 依托单位: Texas A&M Engineering Experiment Station
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 2018
• 资助国家: 美国
• 起止时间: 2018-08-01 至 2023-07-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=1840276&HistoricalAwards=false
• 关键词: Workshop; Blue; Skies; Manufacturing; 2019

This award provides funds to continue the "Blue Skies Manufacturing Workshop" during North America's largest manufacturing conference - the co-located 2019 International Manufacturing Science and Engineering Conference (MSEC) sponsored by the American Society of Mechanical Engineers and the 47th Annual North American Manufacturing Research Conference (NAMRC) sponsored by the North American Manufacturing Research Institution of the Society of Manufacturing Engineers. This conference will take place from June 10-14, 2019 and is hosted by Pennsylvania State University, Erie, Pennsylvania. This is the ideal venue for the workshop, which is designed to identify bold visions for the manufacturing sector more than ten years in the future, and to identify the required basic research needed to achieve that bold vision. These two leading conferences in the manufacturing engineering field act as global bridges between industries, government laboratories, and academic institutions. Blue Skies Activities will include: 1) Brief introductory presentations by Workshop organizers and others; 2) Presentations by 6-8 manufacturing thought leaders; 3) Interactions among workshop participants, NSF program directors, Manufacturing thought leaders, and staff of the interagency Advanced Manufacturing National Program Office. The speakers will be selected from one-page abstracts and their travel to the workshop will be supported by this award. A panel of judges will evaluate the presentations and decide upon a winner. The Society of Manufacturing Engineers continues to award the David Dornfeld Manufacturing Vision Award to the best presentation. The workshop, expected to be attended by at least 100 attendees of the conference, is intended to be the annual event that will help articulate and develop a broad manufacturing vision, and to catalyze support for that vision. The vision will be a useful resource for policy makers, federal funding agencies, companies developing their own manufacturing strategies, university researchers, and others. The support will cover (1) the registration fees, and (2) the travel fees for the speakers and PIs. The call for abstracts is disseminated through the Society of Manufacturing Engineers and the American Society of Mechanical Engineers; the submitted applications go through a selection process by the conference committee. The highest rated applications will be invited to give full presentations. After the conference, a summary of the Blue Skies visions will be published as a North American Manufacturing Research Institute white paper.This award reflects NSF's statutory mission and has been deemed worthy of support through evaluation using the Foundation's intellectual merit and broader impacts review criteria.

该奖项提供资金，以继续在北美最大的制造业会议期间举办“蓝天制造研讨会”-由美国机械工程师协会和第47届北美制造业研究会议（NAMRC）共同主办的2019年国际制造科学与工程会议（MSEC）。由制造工程师协会北美制造研究所主办。本次会议将于2019年6月10日至14日举行，由宾夕法尼亚州伊利的宾夕法尼亚州立大学主办。这是研讨会的理想场所，旨在确定未来十多年制造业的大胆愿景，并确定实现这一大胆愿景所需的基础研究。这两个制造工程领域的领先会议是行业，政府实验室和学术机构之间的全球桥梁。蓝天活动将包括：1）研讨会组织者和其他人的简短介绍性演讲; 2）6-8名制造业思想领袖的演讲; 3）研讨会参与者，NSF项目主任，制造业思想领袖和跨机构先进制造国家项目办公室工作人员之间的互动。演讲者将从一页的摘要中选出，他们参加研讨会的旅费将由该奖项资助。一个评委小组将评估演讲并决定赢家。制造工程师协会继续授予大卫多恩菲尔德制造愿景奖的最佳介绍。该研讨会预计将有至少100名与会者参加，旨在成为年度活动，帮助阐明和制定广泛的制造业愿景，并促进对该愿景的支持。该愿景将成为政策制定者、联邦资助机构、制定自己的制造战略的公司、大学研究人员和其他人的有用资源。支持将包括（1）注册费，以及（2）演讲者和PI的差旅费。通过制造工程师协会和美国机械工程师协会分发摘要的呼吁;提交的申请通过会议委员会的筛选过程。评分最高的应用程序将被邀请进行全面介绍。会议结束后，蓝天愿景的总结将以北美制造研究所白色文件的形式发表。该奖项反映了NSF的法定使命，并通过使用基金会的知识价值和更广泛的影响审查标准进行评估，被认为值得支持。