课题基金 / 基金详情

Stability and durability of polymers and clay-polymer composites in geotechnical environments

Stability and durability of polymers and clay-polymer composites in geotechnical environments
岩土环境中聚合物和粘土聚合物复合材料的稳定性和耐久性
批准号:
279823280
负责人:
Dr.-Ing. Wiebke Baille
金额:
$0.0万
依托单位国家:
德国
项目类别:
Research Grants
财政年份:
2015
资助国家:
德国
项目状态:
已结题
起止时间:
2014-12-31 至 2020-12-31

项目摘要

项目成果

相似基金

相关文献

中文摘要
翻译
聚合物在许多岩土工程和地质环境应用中用于取代膨润土或改善其性能,例如在土工合成粘土衬里中作为支撑流体,在机械化隧道施工中作为润滑剂和土壤调节剂。然而,聚合物在其使用寿命期间会发生降解。在土壤中,聚合物的降解是由机械和化学应力或生物活动引起的。降解改变了相关的聚合物性质,例如聚合物的摩尔质量、电荷分布和组成。随后,还发现聚合物的相关工程性质渗透性、强度和体积行为改变。甚至在文献中也报告了有毒降解产物的释放。这导致了岩土工程应用中聚合物的稳定性和耐久性方面的重大不确定性。稳定性降低,从而增加流动性,以及耐久性不足可能意味着土壤的污染。目前的研究建议集中在岩土工程应用中相关的水力,机械和生物影响所造成的聚合物和聚合物增强土壤的改变。合成聚合物和生物聚合物都被考虑。该项目分为主要部分:(1)开发土壤力学实验室测试所采用的聚合物特性技术;(2)对聚合物和聚合物改性土壤在摩擦流、机械应力和生物活性下的降解进行实验研究;(3)使用数值模拟评估聚合物及其降解产物的流动性。通过大量的实验,建立了分子量与粘度之间的关联式。电荷性质将与已知的盐浓度变化引起的粘度变化有关。根据流变仪测试结果校准简单的流出测试,以使用Hagen-Poietille方程确定粘度,并计划用于快速表征各种聚合物。在第二部分中,将使用适当的实验来调查由阴离子聚合物溶液的摩擦流动引起的降解,由作用于用阳离子聚合物改性的干(脆性)或湿(韧性)土壤的机械剪切应力引起的降解,或由阳离子和阴离子聚合物-土壤混合物中的生物活性微生物引起的降解。根据测量的塑性特性、渗透性、粘度、峰值强度、应力-应变行为和不排水剪切强度以及相应降解影响前后的膨胀指数,对降解进行量化。该研究项目的第三部分涵盖了以粘度为主要参数的聚合物和降解产物流动性的数值研究(使用PLAXIS 3D PlaxFlow)。为此,一个早期开发的数值方法将被修改相对于聚合物溶液。
英文摘要
Polymers are used in numerous geotechnical and geoenvironmental applications to replace bentonite or improve its performance, e.g. as support fluids, in geosynthetic clay liners, as lubrification agent and soil conditioner in mechanized tunnelling. However, polymers are subjected to degradation during their service life time. In soils, degradation of the polymer is caused by mechanical and chemical stresses or due to biological activities. Degradation alters the relevant polymer properties, such as molar mass, charge distribution and composition of the polymer. Subsequently, also the relevant engineering properties permeability, strength, and volumetric behaviour of the polymer are found to alter. Even the release of toxic degradation products has been reported in literature. This leads to significant uncertainties with respect to the stability and durability of polymers within geotechnical applications. A reduced stability, thus increased mobility, and an insufficient durability can imply possible pollution of the soil.The current research proposal focuses on the alteration of polymers and polymer enhanced soils caused by relevant hydraulic, mechanical and biological impacts in geotechnical applications. Both synthetic polymer and biopolymer are considered. The project is divided in the main parts: (1) development of techniques for the characterization of polymers adopted to soil mechanics laboratory testing, (2) experimental investigation on degradation of polymers and polymer-modified soils subjected to frictional flow, mechanical stresses and biological activity, (3) assessment of the mobility of polymers and their degradation products using numerical modelling.In the first part, by an extensive experimental program, correlations between the molar mass and the viscosity are established. The charge properties will be related to a change in viscosity by the known change in salt concentration. A simple outflow test is calibrated against rheometer test results for determining viscosity using Hagen-Poiseuille equation and is planned to be used for quick characterisation of the various polymers. In the second part, the investigation of degradation induced by frictional flow of anionic polymer solutions, by mechanical shear stresses acting on dry (brittle) or wet (ductile) soil modified with cationic polymers, or by biologically active microorganisms in cationic and anionic polymer-soil mixtures will be performed using adequate experiments. Degradation will be quantified based on measured plasticity properties, permeability, viscosity, peak strength, stress-strain behaviour and undrained shear strength, and swell index prior and after the respective degradation impact. The third part of the research project covers a numerical study (with PLAXIS 3D PlaxFlow) on the mobility of polymers and degradation products using viscosity as the main parameter. For this, an earlier developed numerical approach will be modified with respect to polymer solutions.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
海外基金