変態誘起原子空孔-新しい原子空孔形成機構とその役割の検証-

相变诱导原子空位 -新型原子空位形成机制及其作用的验证-

基本信息

  • 批准号:
    05805053
  • 负责人:
  • 金额:
    $ 1.15万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
  • 财政年份:
    1993
  • 资助国家:
    日本
  • 起止时间:
    1993 至 无数据
  • 项目状态:
    已结题

项目摘要

本研究を着想させるに到った異常現象をいくつかの観点から実験的に検証する事を試みた.これまでに得られた結果は,以下のようにまとめられる.1.異常現象を発見したCu_3Auを用いて,変態温度以上の種々の急冷温度から種々の急冷速度で不規則相を凍結したのち等温焼鈍を行い,異常現象の発現する度合を明らかにした.その結果,当初異常が発見された等時焼鈍時に限らず,等温焼鈍時にも明瞭な欠陥形成現象が確認された.急冷温度が高い程異常は大きく,一方急冷速度は速い方が異常が顕著である.また同一の急冷温度・急冷速度を用いた場合は,焼鈍温度が高い程異常の発現する時間は短いことが明かとなった.2.Cu_3Auと同じくL1_2規則構造に変態するAu_3Cdを変態点以上の800Kから急冷し,室温から750Kまで等時焼鈍を加えながら陽電子消滅寿命測定を行った.その結果凍結空孔の消滅および熱平衡空孔の形成が明瞭に捉えられた反面,相変態に起因すると考えられる異常な原子空孔の形成は認められなかった.以上の実験事実をもとに,相変態に伴う原子空孔形成の条件およびメカニズムの解明を進めている.今後規則・不規則変態以外の相変態についても研究を進め,相変態誘起原子空孔の全容を明らかにしたい.
The purpose of this study is to tell you that it is often the same as that in the middle of the day. You can get the results. The following is the best result. 1. As you can see, there are several kinds of rapid cooling temperature above the normal temperature, such as Cu_3Au temperature, temperature and temperature. According to the results of the test, it is common to see that the temperature is limited at the same time, and that it is clear that the defect forms an image to confirm the temperature at the same time. The quench temperature is very high, and the speed of one side is very high. The temperature at the same temperature and the speed at which the quench temperature is quenched at the same temperature are combined, and the temperature at room temperature is very high. The temperature at room temperature is very high, and the temperature at room temperature is 750K. The temperature at room temperature and the temperature at room temperature are 750K and 750K, respectively. Cu _ 3Au is the same as the L1N2 rule. The cycle temperature is above 800K at room temperature. The results show that the empty hole eliminates the balance of the empty hole to form the opposite side of the hole, and the cause is different. The atomic hole is often formed. The above information is related to the formation of atomic holes in the presence of atomic voids. In the future, the study of non-rule behavior has been carried out, and the atomic hole is fully open and clear.

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

白井 泰治其他文献

シリコン・アバランシェ・ダイオードによる陽電子の検出ならびに陽電子寿命のβ+-γ同時計測測定
使用硅雪崩二极管进行正电子检测并同时测量正电子寿命的 β+-γ
  • DOI:
    10.3769/radioisotopes.50.11_576
  • 发表时间:
    2001
  • 期刊:
  • 影响因子:
    0
  • 作者:
    P. Chalermkarnnon;柚賀 正雄;中田 智;岸本 俊二;荒木 秀樹;白井 泰治
  • 通讯作者:
    白井 泰治
接合界面での反応を利用したp型Ti基酸化物導電膜の作製
利用键合界面反应制备p型钛基氧化物导电薄膜
  • DOI:
  • 发表时间:
    2014
  • 期刊:
  • 影响因子:
    0
  • 作者:
    伊藤 和博;林 徳樺;小濱 和之;白井 泰治;村上 正紀
  • 通讯作者:
    村上 正紀

白井 泰治的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('白井 泰治', 18)}}的其他基金

空孔サイズの直接測定による金属ガラスの相安定化機構ならびに結晶化機構の解明
通过直接测量孔径阐明金属玻璃的相稳定和结晶机制
  • 批准号:
    16039213
  • 财政年份:
    2004
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas
プロチウムによる結晶構造変化挙動のポジトロンを用いたその場測定
使用正电子原位测量氕引起的晶体结构变化行为
  • 批准号:
    12022217
  • 财政年份:
    2000
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
変位型相変態の電子系に見られる前駆現象のポジトロンを用いたその場測定
使用在位移型相变电子系统中观察到的前体现象的正电子进行原位测量
  • 批准号:
    11123223
  • 财政年份:
    1999
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
プロチウム吸蔵過程における格子欠陥生成現像のポジトロンを用いたその場測定
使用正电子原位测量氕吸收过程中晶格缺陷的产生和发展
  • 批准号:
    11135216
  • 财政年份:
    1999
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
超塑性変形中のキャビティ成長過程の高温その場測定
超塑性变形过程中空腔生长过程的高温原位测量
  • 批准号:
    10122213
  • 财政年份:
    1998
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
拡散型相変態時における内部歪緩和機構としての原子空孔生成現象の実証
演示原子空位生成作为扩散型相变过程中的内部应变弛豫机制
  • 批准号:
    10136228
  • 财政年份:
    1998
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
ポジトロンを用いる水素吸蔵合金の特性評価-プロチウム吸蔵位置,水素解離圧,およびヒステリシスに注目して-
利用正电子评价储氢合金的特性 - 关注氕储存位置、氢解离压力和滞后 -
  • 批准号:
    10148218
  • 财政年份:
    1998
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas (A)
拡散型相変態における非平衡原子空孔の時間的消長とその速度論的役割
非平衡空位的时间演化及其在扩散型相变中的动力学作用
  • 批准号:
    09242223
  • 财政年份:
    1997
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas
超塑性変形中のキャビティの核形成・成長過程の原子レベル観測
超塑性变形过程中空腔成核和生长过程的原子水平观察
  • 批准号:
    09228220
  • 财政年份:
    1997
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas
超塑性材料の粒界および粒内に存在する空孔型欠陥の陽電子消滅による高温その場測定
利用正电子湮灭技术对超塑性材料晶界和晶内存在的空位型缺陷进行高温原位测量
  • 批准号:
    08242214
  • 财政年份:
    1996
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research on Priority Areas

相似海外基金

照射誘起欠陥挙動のポンププローブ型陽電子消滅分光による評価
使用泵浦探针正电子湮没光谱评估辐照引起的缺陷行为
  • 批准号:
    23K23273
  • 财政年份:
    2024
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
その場陽電子消滅法による鉄鋼における水素脆化関連原子空孔の特定
原位正电子湮灭法识别钢中与氢脆相关的空位
  • 批准号:
    24K08015
  • 财政年份:
    2024
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Hydrogen-induced vacancies in tungsten studied by in-situ analysis of vacancies using positron annihilation measurements under hydrogen charging
利用充氢下的正电子湮没测量对空位进行原位分析,研究钨中氢引起的空位
  • 批准号:
    23K03359
  • 财政年份:
    2023
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Evaluation of irradiation-induced defect behaviors by pump-probe positron annihilation spectroscopy
通过泵浦探针正电子湮没光谱评估辐照引起的缺陷行为
  • 批准号:
    22H02005
  • 财政年份:
    2022
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Development of a positron annihilation apparatus with sub-mm space resolution for the detection of nm-size open volume
开发具有亚毫米空间分辨率的正电子湮没装置,用于检测纳米尺寸开放体积
  • 批准号:
    21K18812
  • 财政年份:
    2021
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Challenging Research (Exploratory)
Gas element-vacancy complexes investigated by electron momentum distribution analysis using a combination of positron annihilation and first-principles calculations
结合正电子湮灭和第一性原理计算,通过电子动量分布分析研究气体元素-空位复合物
  • 批准号:
    20K03902
  • 财政年份:
    2020
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Study of metal fatigue using ultra-precise ∆T0 measurement system for positron annihilation lifetime spectra
利用超精密技术研究金属疲劳
  • 批准号:
    20K12506
  • 财政年份:
    2020
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
EAGER: Collaborative Research: Positron annihilation spectroscopy of Earth materials:A combined materials characterization approach
EAGER:合作研究:地球材料的正电子湮灭光谱:一种组合材料表征方法
  • 批准号:
    2001444
  • 财政年份:
    2019
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Standard Grant
RII Track-4: Use of Positron Annihilation Lifetime Spectroscopy to Engineer Membrane Selective Layers
RII Track-4:使用正电子湮没寿命光谱来设计膜选择性层
  • 批准号:
    1928812
  • 财政年份:
    2019
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Standard Grant
Development of portable positron annihilation lifetime spectrometer and its in situ applications
便携式正电子湮灭寿命谱仪研制及其原位应用
  • 批准号:
    19H02742
  • 财政年份:
    2019
  • 资助金额:
    $ 1.15万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了