Sutudy on Flexible Interface which changes according to Skill

研究是按照以下计划进行的。(1)三维曲线输入法的提出/试制输入装置/评价实验。(2)提出工人特征检测方法/试制检测装置/评价实验。(3)提出技能程度检测方法及评价方法/实验装置评价实验。(4)相应界面技能度的提出与评价实验。提出了结合计算机辅助设计系统的三维曲线输入法，制作了试验装置，并对其精度和处理速度进行了评价。300mm的曲线长度在精度上造成5mm左右的误差。所有的加工都在0.1秒或更短的时间内完成，工人对加工时间的不相容感被记住。如果机器能够被判断为适当的，那么工人通过它输入的更丰富的信息通过表达方法被确认能够显示出与技术人员相同的能力，即使是一个不成熟的人。由于技能程度是通过每次工作的工作结果、工作过程等来评价的，所以评价方法不同。如果所述技能程度与所述疲劳程度有关，则可根据所述疲劳程度推定所述技能程度。因此，这种评价方法可以适用于任何工作。通过测量生理信息来推测疲劳程度是必要的。提出了生理信息的检测方法，并制作了测量装置进行试验。实验明确了生理信息与精神疲劳程度的关系。开发了需要技能的工作模拟器，并进行了在工作过程中根据工人的技能程度改变界面C/D值的实验。当被测试者为技术人员时，工作时间缩短，工作结果保持不变。应用该技术进一步提高了技术程度，证实了该技术的有效性。少

The research was executed according to the following plans. (1) Proposal of input method of three dimension curve / Making of input device for trial purpose /Evaluation experiment. (2) Proposal of detection method of worker's characteristic / Making of detection device for trial purposes / Evaluation experiment. (3) Proposal of detection method of skill degree and evaluation method / evaluation experiment with experimental device. (4) Experiment of proposal and evaluation on skill degree corresponding interface.Three dimension curve input method used with the Computer Aided Design system was proposed, the device was made for trial purposes, and accuracy and the processing speed were evaluated. The error of about 5mm was caused for the length of the curve of 300mm concerning accuracy. All processings were done to 0.1sec or less that the sense of incompatibility was remembered from the worker concerning the processing time. If the machine was able to be judged in adequacy, information wh … More ich the worker had input by it was experssed method was confirmed to being able to demonstrate the same ability as the skill person even by an immature person.The evaluation method is different because the skill degree is evaluated by the work result and the work process, etc.at each work. If the skill degree relates to the tiredness degree, the skill degree can be presumed based on the tiredness degree. Therefore, this evaluation method can use any work. It is necessary to measure physiology information to presume the tiredness degree. The proposal of the detection method of physiology information which did not become a load of work and the measurement device were made for trial purposes. The relation between physiology information and the mental tiredness degree was clarified by the experiment. The simulator of work to require skilling was developed and the experiment by which the C/D value of the interface was changed according to worker's skill degree while working was done. Working hours shortened maintaining the work result when the testee was a skill person. The effectiveness of the proposed technique was confirmed by the skill degree's having improved further by using this technique. Less