A Study on Models and Knowledge-Base for Intelligent Computer-Integrated Manufacturing Systems

智能计算机集成制造系统模型与知识库研究

• 批准号: 02302039
• 负责人: IWATA Kazuaki
• 金额: $ 12.29万
• 依托单位: Osaka University
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Co-operative Research (A)
• 财政年份: 1990
• 资助国家: 日本
• 起止时间: 1990 至 1991
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-02302039/
• 关键词: CIM; knowledge-base; modelling; Intelligent CIM; モデルング; 知的統合生産システム; 生産モデル

The results of this research are summarized as shown below.1) Basic specifications of product models, machine/facility models, factory models, and management models, which are commonly used in prime constitutes - CAD, CAPP, CAM, CAPM -, are analyzed. Based on the analysis, the basic reference model is developed by applying the structured analysis method.2) ICIM research works which are carried out in Japan, U. S. A., and Europe are surveyed and analyzed from the viewpoint of information modelling. A set of computer tools which are necessary to develop ICIM systems are also investigated and evaluated. An ICIM representing tool is developed so as to model both the static-functional structure and the behavior of ICIM.3) Object-oriented database systems (OODBS) are examined with respect to ICIM application, and the specification required for ICIM database is proposed.4) Three-dimensional model constructor is experimentally developed so as to realize rapid manufacturing and estimated by a number of case studies.For the future works of ICIM, we have to study on the combination with the idea of concurrent engineering and the establishment of information infrastructure for ICIM.

1）分析了CAD、CAPP、CAM、CAPM中常用的产品模型、设备模型、工厂模型和管理模型的基本规范。在此基础上，运用结构化分析方法，建立了ICIM的基本参考模型。S.一、从信息建模的角度对欧洲和美国的信息系统进行了分析。一套计算机工具，这是必要的开发ICIM系统也进行了调查和评估。3）研究了面向对象数据库系统（OODBS）在ICIM应用中的应用，提出了ICIM数据库的规范要求; 4）实验性地开发了三维模型构造器，实现了ICIM的快速制造，并通过大量的实例进行了评估。因此，必须研究如何将并行工程的思想与ICIM信息基础设施的建立相结合。

项目成果

K.Iwata,N.Sugimura,and Y.Miao: "A Functional Design Method of Machine Tools in FMS/FMC taking into consideration of Machine Accuracy" Proc.Int.Conf.Manufacturing Systems and Environment. 241-246 (1990)

K.Iwata、N.Sugimura 和 Y.Miao：“考虑机器精度的 FMS/FMC 中机床的功能设计方法”Proc.Int.Conf.Manufacturing Systems and Environment。

Y. Fukuda and K. Iwata: "A Study on Production Models for Advanced CIM" Tech. Rep. TRI, JSPMI. 27-2. 7-10 (1991)

Y. Fukuda 和 K. Iwata：“先进 CIM 生产模型的研究”技术。

K.Iwata & M.Onosato: "Present Status of Standardization Activity on Factory Automation in Japan" Proc.Int.Conf.Manufacturing Systems and Environment. 153-160 (1990)

岩田康

田中 克己: "オブジェクト指向デ-タベ-スの基礎概念" 情報処理. 32ー5. 500-513 (1991)

Katsumi Tanaka：“面向对象数据库的基本概念”信息处理 32-5（1991）。

福田 好朗: "CIM高度化のための生産モデルに関する研究(概要)" 技研所報. 27ー2. 7-10 (1991)

Yoshiaki Fukuda：“高级 CIM 生产模型的研究（概要）”Gikenbo Bulletin 27-2（1991）。