Development of powder composite with three-dimensional and functionally gradient properties

具有三维和功能梯度特性的粉末复合材料的开发

• 批准号: 07555207
• 负责人: TANABE Ikuo
• 金额: $ 2.5万
• 依托单位: Nagaoka University of Technology
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for Scientific Research (A)
• 财政年份: 1995
• 资助国家: 日本
• 起止时间: 1995 至 1996
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-07555207/
• 关键词: Three-dimensional and functionally gradient properties; New Material; Structural material; Powder composite; Damping Material; 三次元傾斜機能; コンポジット

In this study, ponder composite with a three-dimensional and functionally gradient properties has been developed. This material consists of epoxy resin and metal aggregate or ceramics aggregate, i. e., alumina, silicon carbide, zirconia, or a mixture of these. A calculating program of material and that weight for the desired material has developed and bending strength of the boundary area between the materials with two different strengths has been investigated. Next, thermal behavior and dynamic properties of the material have been experimentally investigated. Finally, a few application for industrial material have attempted. The results obtained are as follows.(1) An new manufacturing method for this material has been successfully established. (2) The calculating program could sufficiently use in order to select materials and calculate that weigh. (3) Bending strength of the boundary area is an intermediate value between the two different materials. Hence, This material is only one structure. (4) It is concluded from attractive thermal and dynamic properties and industrial application that this material is very unique and effective.

在这项研究中，已开发出具有三维和功能梯度性能的ponder复合材料。该材料由环氧树脂和金属骨料或陶瓷骨料组成，例如，氧化铝、碳化硅、氧化锆或这些的混合物。编制了所需材料的材料和重量计算程序，并对两种不同强度材料交界处的弯曲强度进行了计算。其次，对材料的热行为和动态性能进行了实验研究。最后，尝试了几种工业材料的应用。所得结果如下。(1)已成功建立了该材料的新制造方法。(2)计算程序可以充分利用，以便选择材料并计算重量。(3)边界区域的弯曲强度是两种不同材料之间的中间值。因此，这种材料只是一种结构。(4)从其优异的热性能、动力学性能和工业应用情况来看，该材料是一种独特而有效的材料。

项目成果

田辺 郁男,水谷淳之介,山田泰弘: "精密工作機械構造用セラミックレジンコンクリートの開発,(三次元傾斜機能材料の開発)" 日本機械学会論文集(C編). 62巻596号. 1619-1625 (1996)

Ikuo Tanabe、Junnosuke Mizutani、Yasuhiro Yamada：“用于精密机床结构的陶瓷树脂混凝土的开发（三维功能梯度材料的开发）”日本机械工程师学会会刊（ed.C），第 62 卷。第596号。1619-1625（1996）

Ikuo TANABE,Jyunnosuke MIZUTANI: "Development of Ceramics Resin Concrete for Precision Machine ToolStructures (Development of material with three-dimensional and functionally gradient properties)" Trans. Japan Soc. Mech. Eng.62-596. 1619-1625 (1996)

Ikuo TANABE、Jyunnosuke MIZUTANI：“精密机床结构用陶瓷树脂混凝土的开发（具有三维和功能梯度特性的材料的开发）”Trans。

田辺郁男,水谷,淳之介,山田泰弘: "精密工作機械構造用セラミックレジンコンクリートの開発(三次元傾斜機能材料の開発)" 日本機械学会論文集(C編). 62巻596号. 1619-1625 (1996)

Ikuo Tanabe、Junnosuke Mizutani、Yasuhiro Yamada：“用于精密机床结构的陶瓷树脂混凝土的开发（三维功能梯度材料的开发）”日本机械工程师学会学报（ed.C），第 62 卷。 .596.1619-1625（1996）