EVALUATION AND IMPROVEMENT OF PRODUCITON< STRENGTH AND TRIBOLOGY OF SURFACE TREATED ENGINEERING METALS AND THIN METAL FILMS

表面处理工程金属和金属薄膜的生产<强度和摩擦学的评估和改进

• 批准号: 11792006
• 负责人: ABE Takeji
• 金额: $ 1.86万
• 依托单位: OKAYAMA UNIVERSITY
• 依托单位国家: 日本
• 项目类别: Grant-in-Aid for University and Society Collaboration
• 财政年份: 1999
• 资助国家: 日本
• 起止时间: 1999 至 2001
• 项目状态: 已结题
• 来源: https://kaken.nii.ac.jp/grant/KAKENHI-PROJECT-11792006/
• 关键词: SURFACE TREATMENT; METALLIC THIN FILM; TRIBOLOGY; ELECTRIC MACHINING; SURFACE ROUGHNESS; FATIGUE STRENGTH; LESER MICROSCOPE; PROBE MICROSCOPE; 3次元表面微細形状測定機; 地域連携研究

Various microscopes and surface roughness measurement instrument were used to investigate the fundamental aspects of deformation processes, fracture mechanisms, tribology and machining. The collaborated researches were performed between University members and the company members. The newly introduced scanning probe microscope, laser microscope, and three-dimensional surface profile measurement equipment were used to investigate the microscopic plastic deformation behavior of various engineering metals. The characteristics of the strength of thin metallic firms were also studied. The effect of surface condition and the surface coatings on the precise grinding process and the electro-machining process were measured. The effect of the surface coatings were studied and the new method of surface coating was proposed.

各种显微镜和表面粗糙度测量仪器被用来研究变形过程，断裂机制，摩擦学和加工的基本方面。合作研究由大学成员和公司成员进行。采用新引进的扫描探针显微镜、激光显微镜和三维表面形貌测量设备研究了各种工程金属的微观塑性变形行为。并对薄金属材料的强度特性进行了研究。测定了表面状态和表面涂层对精密磨削过程和电加工过程的影响。研究了表面涂层的效果，提出了表面涂层的新方法。

项目成果

Tashiyuki TORII: "A Method of Film Fatigue Testing and Effects of Rolling Direction on Fatigue Properties in Copper Film"Proceeding of the Advances in Electronic Packing 1999(InterPACK'99). Vol.26-1. 867-874 (1999)

Tashiyuki TORII：“薄膜疲劳测试方法以及轧制方向对铜薄膜疲劳性能的影响”1999 年电子封装进展论文集 (InterPACK99)。

吉田彰 他: "鋼ローラの転がり疲れに及ぼす表面改質処理の影響(純転がり接触の場合)"日本機械学会論文集(C編). 66巻641号. 275-282 (2000)

Akira Yoshida 等：“表面改性处理对钢滚子滚动疲劳的影响（纯滚动接触的情况）”日本机械工程学会会刊（ed.C）第 66 卷，第 641 期。 275-282 (2000)

MORITAKA HIDA, ET AL.: "OBSERVATION OF SURFACE PERTICIPATE STRUCTURE OF Mg-6%Al ALLOY BY SCANNING PLOBE MICROSCOPE"LIGHT METALS. Vol.52. 126-130 (2002)

MORITAKA%20HIDA,%20ET%20AL.:%20"观察%20OF%20SURFACE%20PERTICIPATE%20结构%20OF%20Mg-6%Al%20ALLOY%20BY%20扫描%20PLOBE%20显微镜"LIGHT%20METALS.%20Vol.52。

岡田 晃: "チタン電極を用いた炭素粉末混入放電加工による表面改質"電気加工学会誌. 33・73. 31-37 (1999)

Akira Okada：“使用钛电极的碳粉混合放电加工的表面改性”日本电气工程师学会杂志33・73（1999）。

Takeji Abe: "Microscopic Observation on Plastic Deformation of Polycrystalline Aluminum by Laser Scanning Microscope"Propceedings of IMMM'99. 471-478 (1999)

Takeji Abe：“激光扫描显微镜对多晶铝塑性变形的显微观察”IMMM99 论文集。