プロチウムの溶解・放出を利用したセル金属構造体の創製
利用氕溶解和释放创建细胞金属结构
基本信息
- 批准号:12022219
- 负责人:
- 金额:$ 1.34万
- 依托单位:
- 依托单位国家:日本
- 项目类别:Grant-in-Aid for Scientific Research on Priority Areas (A)
- 财政年份:2000
- 资助国家:日本
- 起止时间:2000 至 无数据
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
本研究は,加圧ガス雰囲気下における金属の溶融状態と凝固状態におけるガス原子の溶解度差を利用して直線的な微細孔を有するポーラス金属を作製し,ポーラス化による材料の軽量化および機能化という新しい手法を開発することを主な目的としている.具体的な本研究の第1の目的は金属・合金のポーラス化の基本原理を実験的あるいは理論的に発見し,解明することであり,さらには,その基本原理に基づいて種々の金属・合金のポーラス化の製法を確立することである.本研究の第2の目的は,高強度の優れた加工性を有するポーラス金属・合金を作製し,その応用の探索を行うことである.1.水素加圧雰囲気中で金属を溶解し,一方向凝固させることによってサイズの均一な,直線的な微細孔を有するポーラス銅,ポーラス鉄,ポーラスニッケルとそれらの合金を作製することに成功した.2.ポーラス銅の引っ張り強度,降伏強度を微細孔の方向と平行あるいは垂直に切り出した試料について系統的に調べた.従来の発泡金属や焼結金属に比べて格段に優れた強度を有することを明らかにした.3.強制振動法によりポーラス銅の内部摩擦を測定した結果,400℃付近にQ^<-1>が0.1〜0.15程度のきわめて大きな内部摩擦ピークを発見した.これは微細孔内に取り込まれた水素が銅中に解離し水素原子対を形成して移動するためであると結論づけた.
This study aims to develop new methods for manufacturing metals by utilizing the difference in atomic solubility between the molten state and the solidified state of metals under elevated pressure and by utilizing linear micropores. The first purpose of this study is to develop the basic principles of metal alloy transformation and to establish the basic principles of metal alloy transformation. The second objective of this study is to explore the application of high strength and excellent machinability to metals and alloys. 1. The metal is dissolved in water under pressure and solidified in one direction. 2. Uniformity of metal and alloy. 3. Linear micropores. 4. Copper and iron. 2. The tensile strength of copper, the voltage drop strength, the direction of micropores, the parallel direction, the vertical direction, the cut out of the sample, the adjustment of the sample system. 3. Internal friction of copper was measured by forced vibration method. The results showed that the internal friction of copper was <-1>0.1 ~ 0.15 at 400 ℃. This is the result of the dissociation of water atoms in micropores.
项目成果
期刊论文数量(11)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
S.K.Hyun: "Mechanical Properties of Porous Copper Fabricated by Unidirectional Solidification under High Pressure Hydrogen,"Proc.of Int.Conf.on Solid-Solid Phase Transformations'99. 341-344 (1999)
S.K.Hyun:“高压氢气下单向凝固制备的多孔铜的机械性能”,Proc.of Int.Conf.on Solid-Solid Phase Transformations99。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
中嶋英雄: "一方向凝固法によるポーラス銅の創製と機械的性質"伸銅技術研究会誌. 39. 207-214 (2000)
Hideo Nakajima:“单向凝固多孔铜的生成和机械性能”《铜轧制技术研究组杂志》39. 207-214 (2000)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
中嶋英雄: "孔の向きのそろったポーラス金属"高温学会誌. 26. 95-100 (2000)
Hideo Nakajima:“具有均匀定向孔的多孔金属”高温科学学会杂志 26. 95-100 (2000)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
H.Nakajima: "Fabrication of porous copper by unidirectional splidification under hydrogen an its properties,"Colloids and Surfaces A. 179. 209-214 (2001)
H.Nakajima:“在氢作用下通过单向分裂制备多孔铜及其特性”,Colloids and Surfaces A. 179. 209-214 (2001)
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
中嶋英雄: "軽くて強いポーラス金属"機能材料. 20. 27-34 (2000)
中岛秀夫:“轻而强的多孔金属”功能材料。20. 27-34 (2000)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
中嶋 英雄其他文献
まちなかの居場所の存在が地域との関係性や生活の質に与える影響に関する研究
研究城镇中某个地点的存在对社区关系和生活质量的影响
- DOI:
- 发表时间:
2012 - 期刊:
- 影响因子:0
- 作者:
河野慎平;他17名;中嶋 英雄;川村竜之介・谷口綾子 - 通讯作者:
川村竜之介・谷口綾子
Crystal and defect structures of La_<2/3-x>Li_xTiO_3(x〜0.1) produced by a melt process
熔融法制备的La_<2/3-x>Li_xTiO_3(x〜0.1)的晶体和缺陷结构
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
仲村 龍介;李 正九;森 博太郎;中嶋 英雄;桐原聡秀;S. Kirihara;R.Nakamura;S. Kirihara;K. Kishida;桐原聡秀;R.Nakamura;K. Kishida - 通讯作者:
K. Kishida
Improvement of Battery Performance by Surface Modification of Crystalline Solid Electrolyte for All Solid-State Lithium Batteries
全固态锂电池结晶固体电解质表面改性改善电池性能
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
仲村 龍介;李 正九;森 博太郎;中嶋 英雄;桐原聡秀;S. Kirihara;R.Nakamura;S. Kirihara;K. Kishida;桐原聡秀;R.Nakamura;K. Kishida;桐原聡秀;R.Nakamura;T. Kosho;桐原聡秀;桐原聡秀;R.Nakamura;K. Kishida - 通讯作者:
K. Kishida
ポーラス材料学 - 多孔質が創る新機能性材料 -
多孔材料科学-利用孔隙创造新功能材料-
- DOI:
- 发表时间:
2016 - 期刊:
- 影响因子:0
- 作者:
P.Zhao;A.Ito;R.Tu;T.Goto;中嶋 英雄 - 通讯作者:
中嶋 英雄
Smart Processing of Micro Ceramic Structures: Fabrication of Photonic Crystals and Fractals for Terahertz Wave Control by Using Micro-stereolithography
微陶瓷结构的智能加工:利用微立体光刻技术制造用于太赫兹波控制的光子晶体和分形
- DOI:
- 发表时间:
2007 - 期刊:
- 影响因子:0
- 作者:
仲村 龍介;李 正九;森 博太郎;中嶋 英雄;桐原聡秀;S. Kirihara - 通讯作者:
S. Kirihara
中嶋 英雄的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('中嶋 英雄', 18)}}的其他基金
ガス化合物添加による貫通孔型ポーラス金属の製法開発と電子・医療機器材料への応用
添加气态化合物的通孔多孔金属制造方法的开发及其在电子和医疗器械材料中的应用
- 批准号:
21656174 - 财政年份:2009
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Challenging Exploratory Research
無垢の鉄よりも4倍の比強度をもつ軽量高強度鉄の創製
制造轻质高强度钢,其比强度是实心铁的四倍
- 批准号:
15656175 - 财政年份:2003
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Exploratory Research
ロータス形状ポーラス金属の応用開発
莲花状多孔金属的应用开发
- 批准号:
11792022 - 财政年份:1999
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for University and Society Collaboration
プロチウムの溶解・放出を利用したセル金属構造体の創製
利用氕溶解和释放创建细胞金属结构
- 批准号:
11135219 - 财政年份:1999
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas (A)
超塑性材料における粒界拡散および格子拡散
超塑性材料中的晶界和晶格扩散
- 批准号:
10122212 - 财政年份:1998
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas (A)
プロチウムの溶解放出を利用したセル金属構造体の創製
利用氕的溶解和释放创建细胞金属结构
- 批准号:
10148217 - 财政年份:1998
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas (A)
超塑性材料における粒界拡散および格子拡散
超塑性材料中的晶界和晶格扩散
- 批准号:
09228219 - 财政年份:1997
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
超塑性材料における粒界拡散および格子拡散
超塑性材料中的晶界和晶格扩散
- 批准号:
08242202 - 财政年份:1996
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
ポーラス金属合金の創製と構造・機能材料への応用
多孔金属合金的创建及其在结构和功能材料中的应用
- 批准号:
08875138 - 财政年份:1996
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Exploratory Research
高融点金属間化合物における拡散の研究
高熔点金属间化合物的扩散研究
- 批准号:
06215203 - 财政年份:1994
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Scientific Research on Priority Areas
相似海外基金
Design of metal structures of custom composition using additive manufacturing
使用增材制造设计定制成分的金属结构
- 批准号:
2593424 - 财政年份:2025
- 资助金额:
$ 1.34万 - 项目类别:
Studentship
Tungsten Biocatalysis - Heavy Metal Enzymes for Sustainable Industrial Biocatalysis
钨生物催化 - 用于可持续工业生物催化的重金属酶
- 批准号:
10097682 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
EU-Funded
Understanding the electronic structure landscape in wide band gap metal halide perovskites
了解宽带隙金属卤化物钙钛矿的电子结构景观
- 批准号:
EP/X039285/1 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Research Grant
RII Track-4:NSF: Design of zeolite-encapsulated metal phthalocyanines catalysts enabled by insights from synchrotron-based X-ray techniques
RII Track-4:NSF:通过基于同步加速器的 X 射线技术的见解实现沸石封装金属酞菁催化剂的设计
- 批准号:
2327267 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Standard Grant
CAREER: Bridging Research & Education in Delineating Fatigue Performance & Damage Mechanisms in Metal Fused Filament Fabricated Inconel 718
职业:桥梁研究
- 批准号:
2338178 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Standard Grant
CAREER: Nonlinear Dynamics of Exciton-Polarons in Two-Dimensional Metal Halides Probed by Quantum-Optical Methods
职业:通过量子光学方法探测二维金属卤化物中激子极化子的非线性动力学
- 批准号:
2338663 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Continuing Grant
STTR Phase I: Advanced Lithium Metal Anodes for Solid-State Batteries
STTR 第一阶段:用于固态电池的先进锂金属阳极
- 批准号:
2335454 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Standard Grant
Transition Metal - Main Group Multiple Bonding
过渡金属 - 主族多重键合
- 批准号:
2349123 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Standard Grant
Flexible metal-organic frameworks (MOFs) for hydrogen isotope separation: insights into smart recognition of gas molecules towards materials design
用于氢同位素分离的柔性金属有机框架(MOF):深入了解气体分子对材料设计的智能识别
- 批准号:
24K17650 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Grant-in-Aid for Early-Career Scientists
CAREER: Overcoming the trade-off between thermopower and conductivity in transition metal oxides
职业生涯:克服过渡金属氧化物热电势和电导率之间的权衡
- 批准号:
2340234 - 财政年份:2024
- 资助金额:
$ 1.34万 - 项目类别:
Continuing Grant