Development of a New Impact High Pressure Apparatus and Rheological Evaluations of Lubricating Oils under Dynamic Compression

新型冲击高压装置的开发及动态压缩下润滑油的流变学评价

基本信息

  • 批准号:
    23560160
  • 负责人:
  • 金额:
    $ 3.41万
  • 依托单位:
  • 依托单位国家:
    日本
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
  • 财政年份:
    2011
  • 资助国家:
    日本
  • 起止时间:
    2011 至 2013
  • 项目状态:
    已结题

项目摘要

A new impact high pressure apparatus was developed with a diamond-anvil pressure cell. Employing this apparatus and sphere deformation analysis method, solidification pressures and estimated traction coefficients of lubricating oils were obtained under milliseconds order impact dynamic compression up to 3 GPa. (Similar pressure in roller bearings) They were a little lower than those under the quasi-static compression condition, but were roughly the same as those. Consequently, although increments of equivalent strain and mean diameter of deformed metal spheres were at most a half smaller than those under the quasi-static compression condition, dynamic high pressure friction properties of solidified lubricating oils in rheological and mechanical viewpoints can be approximated by those under the quasi-static compression condition.
研制了一种新型的金刚石压砧冲击高压装置。利用该装置和球体变形分析方法,获得了润滑油在3GPa以下毫秒级冲击动态压缩下的凝固压力和牵引系数估算值。(滚子轴承中的压力相似)比准静态压缩条件下的压力稍低,但大致相同。因此,虽然变形金属球的等效应变和平均直径的增量最多比准静态压缩条件下的增量小一半,但从流变学和机械学的观点来看,固化润滑油的动态高压摩擦性能可以近似于准静态压缩条件下的那些。

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
新型打撃高圧装置によるグリースおよび基油の動的高圧レオロジー評価
使用新型冲击高压装置对润滑脂和基础油进行动态高压流变评价
  • DOI:
  • 发表时间:
    2013
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Yuichi Nakamura;Takashi Yukawa;Sachiko Kubo;Masahito Matsui;中村裕一,三嶋将太,土田悠生,松井正仁,今戸啓二
  • 通讯作者:
    中村裕一,三嶋将太,土田悠生,松井正仁,今戸啓二
Rheological Evaluations of Solidified Lubricating Greases and Their Base Oils under Very High Pressure
超高压固化润滑脂及其基础油的流变评价
  • DOI:
    10.2474/trol.8.303
  • 发表时间:
    2013
  • 期刊:
  • 影响因子:
    1
  • 作者:
    Yuichi Nakamura;Takashi Yukawa;Sachiko Kubo;Masahito Matsui
  • 通讯作者:
    Masahito Matsui
宇宙用潤滑剤およびイオン液体の高圧粘度測定
太空润滑剂和离子液体的高压粘度测量
  • DOI:
  • 发表时间:
    2013
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Yuichi Nakamura;Takashi Yukawa;Sachiko Kubo;Masahito Matsui;中村裕一,三嶋将太,土田悠生,松井正仁,今戸啓二;中村裕一,鈴木史明,冨士嵩浩,松井正仁
  • 通讯作者:
    中村裕一,鈴木史明,冨士嵩浩,松井正仁
新型打撃高圧装置の開発と動的圧縮下におけるグリースの高圧固化レオロジー評価
新型冲击高压装置研制及动态压缩下润滑脂高压凝固流变性能评价
  • DOI:
  • 发表时间:
    2012
  • 期刊:
  • 影响因子:
    0
  • 作者:
    Katsuhito Nishimura;Yuichi Nakamura;and Masahito Matsui;中村裕一・三嶋 将太・ 土田 悠生・松井正仁・今戸啓二
  • 通讯作者:
    中村裕一・三嶋 将太・ 土田 悠生・松井正仁・今戸啓二
Static Rheological Evaluations of Solidified Lubricant Greases and Their Base Oils under Very High Pressure
超高压下固化润滑油脂及其基础油的静态流变评价
{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

NAKAMURA Yuichi其他文献

Fabrication and properties of oxide thermoelectric thick film elements by aerosol deposition method
气溶胶沉积法氧化物热电厚膜元件的制备及性能
  • DOI:
  • 发表时间:
    2019
  • 期刊:
  • 影响因子:
    0
  • 作者:
    NAKAMURA Yuichi;INOUE Mitsuteru
  • 通讯作者:
    INOUE Mitsuteru

NAKAMURA Yuichi的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('NAKAMURA Yuichi', 18)}}的其他基金

Analysis of feeling of material and operation induced by expectation and its application to artifacts design
期望引发的物质感和操作感分析及其在制品设计中的应用
  • 批准号:
    17K19976
  • 财政年份:
    2017
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Challenging Research (Exploratory)
Kinesiological analysis of gentle touch and design of intelligent communication
轻柔触摸运动学分析与智能通讯设计
  • 批准号:
    15K12080
  • 财政年份:
    2015
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Challenging Exploratory Research
Record, Analysis, and Detection of Episodic Memory Oblivion using Wearable Lifelog
使用可穿戴生活日志记录、分析和检测情景记忆遗忘
  • 批准号:
    25540082
  • 财政年份:
    2013
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Challenging Exploratory Research
Investigation of various forms and functions of questions toward"Question Engineering"
对“问题工程”问题的各种形式和功能的探讨
  • 批准号:
    22650021
  • 财政年份:
    2010
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Challenging Exploratory Research
Rheological Evaluations of Solidified Lubricant Oils under Very High Pressure by Analyzing Microsphere Deformations in the Oils
通过分析油中微球变形来评价超高压下固化润滑油的流变性
  • 批准号:
    19560141
  • 财政年份:
    2007
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Fracture plane control method in blasting to reduce influence on environment
爆破断面控制方法减少对环境的影响
  • 批准号:
    19560815
  • 财政年份:
    2007
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Structures, propagation characteristics of stress waves and dynamic fracture behavior in blasting
结构、应力波传播特性及爆破动态断裂行为
  • 批准号:
    16560712
  • 财政年份:
    2004
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Measurement of solidified lubricant's density hysteresis by pressure and temperature under high pressure
高压下压力和温度测量固化润滑剂的密度滞后
  • 批准号:
    13650152
  • 财政年份:
    2001
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
Intelligent Media for Realizing Question-Answering with Appropriate Images and Videos
智能媒体,通过合适的图片和视频实现问答
  • 批准号:
    13480087
  • 财政年份:
    2001
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)
Developments of Fracture Plane Control Method and Fragmentation Control Method by High-Precise Time Control Blasting
高精度控时爆破裂隙面控制方法和破碎控制方法的研究进展
  • 批准号:
    12555287
  • 财政年份:
    2000
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (B)

相似海外基金

積層方向と形状に沿った方向に炭素繊維で強化した機能的な機械要素の光造形
在堆叠方向和形状上用碳纤维增强的功能机械元件的立体光刻
  • 批准号:
    22K03856
  • 财政年份:
    2022
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Scientific Research (C)
超低摩擦機械要素実現のための窒化炭素膜超低凝着表面層の測定及び極性基の同定
氮化碳薄膜超低附着力表层测量及极性基团识别,实现超低摩擦机械元件
  • 批准号:
    18860036
  • 财政年份:
    2006
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Young Scientists (Start-up)
自己組織化単分子層の凹凸パターンを利用した微小機械要素の表面機能化に関する研究
利用自组装单层不均匀图案进行微机械元件表面功能化的研究
  • 批准号:
    15656031
  • 财政年份:
    2003
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Exploratory Research
極微機械要素ハンドリングシステムの試作研究
微机械元件搬运系统原型研究
  • 批准号:
    07555631
  • 财政年份:
    1995
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Developmental Scientific Research (B)
工作機械要素の熱移動のモデル化
机床元件中的传热建模
  • 批准号:
    04750097
  • 财政年份:
    1992
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
微小機械システムの機械要素および機構に関する基礎的研究
微机械系统机械元件与机构基础研究
  • 批准号:
    03650123
  • 财政年份:
    1991
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for General Scientific Research (C)
機械要素におけるエネルギ損失の振動インテンシティ計測による評価
使用振动强度测量评估机械元件的能量损失
  • 批准号:
    02750094
  • 财政年份:
    1990
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
精密機械要素における摩耗試験の信頼性評価と統計的摩耗予測式の定式化
精密机械元件磨损试验的可靠性评估及统计磨损预测公式的制定
  • 批准号:
    01750128
  • 财政年份:
    1989
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
不等速運動機構の最適機械要素選定のための意思決定支援システムに関する研究
不恒定运动机构最优机械元件选择决策支持系统研究
  • 批准号:
    01750127
  • 财政年份:
    1989
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
適応制御を導入した転造方式による機械要素の高精度塑性加工
采用自适应控制滚压法对机械元件进行高精度塑性加工
  • 批准号:
    01750108
  • 财政年份:
    1989
  • 资助金额:
    $ 3.41万
  • 项目类别:
    Grant-in-Aid for Encouragement of Young Scientists (A)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了