Laser Induced Transfer for Printed Electronics Devices (LITPED

用于印刷电子设备的激光诱导转移 (LITPED

• 批准号: 131561
• 金额: $ 18.09万
• 依托单位: DZP TECHNOLOGIES LIMITED
• 依托单位国家: 英国
• 项目类别: Feasibility Studies
• 财政年份: 2014
• 资助国家: 英国
• 起止时间: 2014 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=131561
• 关键词: Laser; Induced; Transfer; Printed; Electronics

This project proposes a pre-industrial feasibility study to investigate the application of our proprietary technology, Laser Induced Transfer for Printed Electronic Devices (LITPED), for the production of high-resolution silver conductive patterns. Such patterns can be used as interconnects and transparent conductive films in low-weight, ultra-thin touch screens, displays and miniaturised devices in the emerging and fast moving plastic electronics sector. The study will utilise the latest advances in solid state diode lasers to enable the printing of high quality silver patterns that are impossible to obtain by other methods. LITPED is a disruptive technology that will transform the way we use and manufacture electronics. In future, it can be used for point-of-use, user defined manufacture of electronics using simple desk-top printers. The study will culminate with the demonstration of a capacitive touch sensor produced by the LITPED method. This is a collaborative projects between DZP Technologies Ltd (a technology development SME) and the University of Cambridge.

该项目提出了一个工业前的可行性研究，以调查我们的专有技术，激光诱导转移印刷电子器件（LITPED），用于生产高分辨率银导电图案的应用。这种图案可用作新兴和快速发展的塑料电子行业中的低重量超薄触摸屏、显示器和封装设备中的互连和透明导电膜。这项研究将利用固态二极管激光器的最新进展，使印刷高质量的银图案，这是不可能获得的其他方法。LITPED是一项颠覆性技术，将改变我们使用和制造电子产品的方式。在未来，它可以用于使用点，用户定义的电子制造使用简单的桌面打印机。该研究将最终演示由LITPED方法生产的电容式触摸传感器。这是DZP技术有限公司（一家技术开发中小企业）和剑桥大学之间的合作项目。