THERMIX, novel adaptable heat exchanger inserts for ultra-efficient heat transfer in viscous complex fluids
THERMIX,新型适应性强的热交换器插件,可在粘性复杂流体中实现超高效传热
基本信息
- 批准号:57083
- 负责人:
- 金额:$ 44.56万
- 依托单位:
- 依托单位国家:英国
- 项目类别:Study
- 财政年份:2020
- 资助国家:英国
- 起止时间:2020 至 无数据
- 项目状态:已结题
- 来源:
- 关键词:
项目摘要
As we move to a decarbonised world, the focus on energy efficiency in the process industry becomes ever greater. This industry alone uses at least 11% of the UK's heating energy demand with the focus now narrowing on making every step of the process as efficient as possible to reduce energy use and carbon dioxide emissions. The process industry largely uses heat exchangers to heat and cool process fluids or to recover energy. CALGAVIN specialises in the research, design, specification and manufacturing of in-tube heat transfer enhancement devices for process exchangers which it sells worldwide. In-tube inserts are in general metal structures that are installed into the tubes and manipulate the fluid flow to improve the heat transfer between two fluids and that allow heat exchangers to be smaller, less expensive and more efficient. However, some fluids have properties that make them difficult to enhance. Such fluids can be highly viscous which gives them a thick, honey-like texture that severely inhibits the effectiveness of heat transfer. Other types of fluids are comparatively little studied, "complex" fluids that change how easily or otherwise they flow, depending on how much stress is applied to them. High viscosity and complex fluids are used in a huge variety of products including petrochemicals, plastics, polymers, paints/coatings, food products and fast-moving consumer goods. Currently insert geometries, established for use in mixing fluids inside tubes, are also used for enhancing heat exchanger performance but not having been optimised for this use, they carry a high penalty in terms of large pumping power needed relative to the limited heat transfer enhancement gained. CALGAVIN will use the now available, state-of-the-art technologies for measurement, in conjunction with the University of Birmingham, to further develop insert technology made specially for high viscous and complex flows. Each process has varying characteristics, requiring unique designs and for which clients require process guarantees. The resulting joint research, development and testing programme will lead to CALGAVIN expanding its range of unique products and technical solutions to satisfy its growing list of processors worldwide.
随着我们走向脱碳世界,对过程工业能效的关注变得越来越大。仅这个行业就使用了英国至少11%的供暖能源需求,现在的重点是尽可能有效地减少能源使用和二氧化碳排放。过程工业主要使用热交换器来加热和冷却过程流体或回收能量。CALGAVIN专门从事过程交换器管内传热增强装置的研究、设计、规范和制造,并在全球范围内销售。管内插入件通常是金属结构,其安装在管中并操纵流体流动以改善两种流体之间的热传递,并允许热交换器更小、更便宜和更有效。然而,一些流体具有使其难以增强的性质。这种流体可能是高度粘稠的,这使它们具有厚的、蜂蜜状的质地,严重抑制了热传递的有效性。其他类型的流体研究相对较少,“复杂”的流体,改变如何容易或以其他方式流动,这取决于有多少应力施加到他们。高粘度和复杂流体用于各种产品,包括石化产品、塑料、聚合物、油漆/涂料、食品和快速消费品。目前,为在管内混合流体而建立的插入件几何形状也用于增强热交换器性能,但尚未针对该用途进行优化,它们在相对于所获得的有限的传热增强所需的大泵送功率方面具有很高的代价。CALGAVIN将与伯明翰大学合作,使用现有的最先进的测量技术,进一步开发专门用于高粘度和复杂流动的插入技术。每种工艺都有不同的特点,需要独特的设计,客户需要工艺保证。由此产生的联合研究,开发和测试计划将导致卡尔加文扩大其独特的产品和技术解决方案的范围,以满足其不断增长的全球处理器名单。
项目成果
期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)
数据更新时间:{{ journalArticles.updateTime }}
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
数据更新时间:{{ journalArticles.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ monograph.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ sciAawards.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ conferencePapers.updateTime }}
{{ item.title }}
- 作者:
{{ item.author }}
数据更新时间:{{ patent.updateTime }}
其他文献
吉治仁志 他: "トランスジェニックマウスによるTIMP-1の線維化促進機序"最新医学. 55. 1781-1787 (2000)
Hitoshi Yoshiji 等:“转基因小鼠中 TIMP-1 的促纤维化机制”现代医学 55. 1781-1787 (2000)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
LiDAR Implementations for Autonomous Vehicle Applications
- DOI:
- 发表时间:
2021 - 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
吉治仁志 他: "イラスト医学&サイエンスシリーズ血管の分子医学"羊土社(渋谷正史編). 125 (2000)
Hitoshi Yoshiji 等人:“血管医学与科学系列分子医学图解”Yodosha(涉谷正志编辑)125(2000)。
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
Effect of manidipine hydrochloride,a calcium antagonist,on isoproterenol-induced left ventricular hypertrophy: "Yoshiyama,M.,Takeuchi,K.,Kim,S.,Hanatani,A.,Omura,T.,Toda,I.,Akioka,K.,Teragaki,M.,Iwao,H.and Yoshikawa,J." Jpn Circ J. 62(1). 47-52 (1998)
钙拮抗剂盐酸马尼地平对异丙肾上腺素引起的左心室肥厚的影响:“Yoshiyama,M.,Takeuchi,K.,Kim,S.,Hanatani,A.,Omura,T.,Toda,I.,Akioka,
- DOI:
- 发表时间:
- 期刊:
- 影响因子:0
- 作者:
- 通讯作者:
的其他文献
{{
item.title }}
{{ item.translation_title }}
- DOI:
{{ item.doi }} - 发表时间:
{{ item.publish_year }} - 期刊:
- 影响因子:{{ item.factor }}
- 作者:
{{ item.authors }} - 通讯作者:
{{ item.author }}
{{ truncateString('', 18)}}的其他基金
An implantable biosensor microsystem for real-time measurement of circulating biomarkers
用于实时测量循环生物标志物的植入式生物传感器微系统
- 批准号:
2901954 - 财政年份:2028
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Exploiting the polysaccharide breakdown capacity of the human gut microbiome to develop environmentally sustainable dishwashing solutions
利用人类肠道微生物群的多糖分解能力来开发环境可持续的洗碗解决方案
- 批准号:
2896097 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
A Robot that Swims Through Granular Materials
可以在颗粒材料中游动的机器人
- 批准号:
2780268 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Likelihood and impact of severe space weather events on the resilience of nuclear power and safeguards monitoring.
严重空间天气事件对核电和保障监督的恢复力的可能性和影响。
- 批准号:
2908918 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Proton, alpha and gamma irradiation assisted stress corrosion cracking: understanding the fuel-stainless steel interface
质子、α 和 γ 辐照辅助应力腐蚀开裂:了解燃料-不锈钢界面
- 批准号:
2908693 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Field Assisted Sintering of Nuclear Fuel Simulants
核燃料模拟物的现场辅助烧结
- 批准号:
2908917 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Assessment of new fatigue capable titanium alloys for aerospace applications
评估用于航空航天应用的新型抗疲劳钛合金
- 批准号:
2879438 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Developing a 3D printed skin model using a Dextran - Collagen hydrogel to analyse the cellular and epigenetic effects of interleukin-17 inhibitors in
使用右旋糖酐-胶原蛋白水凝胶开发 3D 打印皮肤模型,以分析白细胞介素 17 抑制剂的细胞和表观遗传效应
- 批准号:
2890513 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
CDT year 1 so TBC in Oct 2024
CDT 第 1 年,预计 2024 年 10 月
- 批准号:
2879865 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
Understanding the interplay between the gut microbiome, behavior and urbanisation in wild birds
了解野生鸟类肠道微生物组、行为和城市化之间的相互作用
- 批准号:
2876993 - 财政年份:2027
- 资助金额:
$ 44.56万 - 项目类别:
Studentship
相似国自然基金
Novel-miR-1134调控LHCGR的表达介导拟
穴青蟹卵巢发育的机制研究
- 批准号:
- 批准年份:2025
- 资助金额:10.0 万元
- 项目类别:省市级项目
novel-miR75靶向OPR2,CA2和STK基因调控人参真菌胁迫响应的分子机制研究
- 批准号:82304677
- 批准年份:2023
- 资助金额:30.00 万元
- 项目类别:青年科学基金项目
海南广藿香Novel17-GSO1响应p-HBA调控连作障碍的分子机制
- 批准号:82304658
- 批准年份:2023
- 资助金额:30 万元
- 项目类别:青年科学基金项目
白术多糖通过novel-mir2双靶向TRADD/MLKL缓解免疫抑制雏鹅的胸腺程序性坏死
- 批准号:
- 批准年份:2021
- 资助金额:30 万元
- 项目类别:青年科学基金项目
novel_circ_001042/miR-298-5p/Capn1轴调节线粒体能量代谢在先天性肛门直肠畸形发生中的作用机制研究
- 批准号:
- 批准年份:2021
- 资助金额:55 万元
- 项目类别:面上项目
novel-miR-59靶向HMGAs介导儿童早衰症细胞衰老的作用及机制研究
- 批准号:
- 批准年份:2021
- 资助金额:58 万元
- 项目类别:面上项目
novel_circ_008138/rno-miR-374-3p/SFRP4调控Wnt信号通路参与先天性肛门直肠畸形发生的分子机制研究
- 批准号:82070530
- 批准年份:2020
- 资助金额:55 万元
- 项目类别:面上项目
miRNA-novel-272通过靶向半乳糖凝集素3调控牙鲆肠道上皮细胞炎症反应的机制研究
- 批准号:32002421
- 批准年份:2020
- 资助金额:24.0 万元
- 项目类别:青年科学基金项目
m6A修饰介导的lncRNA WEE2-AS1转录后novel-pri-miRNA剪切机制在胶质瘤恶性进展中的作用研究
- 批准号:
- 批准年份:2020
- 资助金额:55 万元
- 项目类别:面上项目
miRNA/novel_167靶向抑制Dmrt1的表达在红鳍东方鲀性别分化过程中的功能研究
- 批准号:31902347
- 批准年份:2019
- 资助金额:25.0 万元
- 项目类别:青年科学基金项目
相似海外基金
Rapidly Adaptable and Mass-Producible Microscopic Chiplets for Minimally-Instrumented Respiratory Viral Screening
用于微仪器呼吸道病毒筛查的快速适应性和可大规模生产的显微芯片
- 批准号:
10348469 - 财政年份:2022
- 资助金额:
$ 44.56万 - 项目类别:
Rapidly Adaptable and Mass-Producible Microscopic Chiplets for Minimally-Instrumented Respiratory Viral Screening
用于微仪器呼吸道病毒筛查的快速适应性和大规模生产的显微芯片
- 批准号:
10681205 - 财政年份:2022
- 资助金额:
$ 44.56万 - 项目类别:
Adaptable and scalable electroporation for cellular therapy
用于细胞治疗的适应性和可扩展的电穿孔
- 批准号:
10545845 - 财政年份:2022
- 资助金额:
$ 44.56万 - 项目类别:
The first adaptable, 3D-formfitting microelectrode array for organoid-based models of neurological and neurodegenerative diseases
第一个适应性强的 3D 贴合微电极阵列,用于基于类器官的神经系统和神经退行性疾病模型
- 批准号:
10324053 - 财政年份:2021
- 资助金额:
$ 44.56万 - 项目类别:
The first adaptable, 3D-formfitting microelectrode array for organoid-based models of neurological and neurodegenerative diseases
第一个适应性强的 3D 贴合微电极阵列,用于基于类器官的神经系统和神经退行性疾病模型
- 批准号:
10584822 - 财政年份:2021
- 资助金额:
$ 44.56万 - 项目类别:
Adaptable tissue-specific endothelial cells for organ regeneration
用于器官再生的适应性组织特异性内皮细胞
- 批准号:
10594461 - 财政年份:2020
- 资助金额:
$ 44.56万 - 项目类别:
Development of an Automated and Adaptable Novel Irrigation System for Greenhouse Expansion to Efficiently meet the Water and Nutrient Needs of Various Tree and Plant Species
开发用于温室扩建的自动化、适应性强的新型灌溉系统,以有效满足各种树木和植物物种的水和养分需求
- 批准号:
561013-2020 - 财政年份:2020
- 资助金额:
$ 44.56万 - 项目类别:
Applied Research and Development Grants - Level 1
Adaptable tissue-specific endothelial cells for organ regeneration
用于器官再生的适应性组织特异性内皮细胞
- 批准号:
9894491 - 财政年份:2020
- 资助金额:
$ 44.56万 - 项目类别:
Adaptable tissue-specific endothelial cells for organ regeneration
用于器官再生的适应性组织特异性内皮细胞
- 批准号:
10397474 - 财政年份:2020
- 资助金额:
$ 44.56万 - 项目类别:
ePACE: automation platforms for adaptable and scalable continuous evolution of biomolecules with therapeutic potential
ePACE:自动化平台,用于具有治疗潜力的生物分子的适应性和可扩展的持续进化
- 批准号:
10734591 - 财政年份:2019
- 资助金额:
$ 44.56万 - 项目类别: