Smart peripheral stents for the lower extremity: design, manufacturing, and evaluation

下肢智能外周支架：设计、制造和评估

• 批准号: EP/R00160X/1
• 负责人: Moataz Attallah
• 金额: $ 29.46万
• 依托单位: University of Birmingham
• 依托单位国家: 英国
• 项目类别: Research Grant
• 财政年份: 2017
• 资助国家: 英国
• 起止时间: 2017 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=EP%2FR00160X%2F1
• 关键词: Smart; peripheral; stents; lower; extremity

Abstracts are not currently available in GtR for all funded research. This is normally because the abstract was not required at the time of proposal submission, but may be because it included sensitive information such as personal details.

目前GtR中并没有所有资助研究的摘要。这通常是因为在提交提案时不需要摘要，但也可能是因为摘要中包含个人详细信息等敏感信息。

项目成果

In vitro study of the deployment performance of 3D printed stents in the diseased artery with the lipid arterial plaques

• DOI: 10.1016/j.prostr.2022.12.077
• 发表时间: 2022
• 期刊: Procedia Structural Integrity
• 作者: M. Abdulsalam;J. Feng;R. Garrard;M. Attallah;F. Serracino-Inglott;L. Zhao

Development, Characterisation, and Modelling of Processability of Nitinol Stents using Laser Powder Bed Fusion

• DOI: 10.1016/j.jallcom.2022.164681
• 发表时间: 2022-03
• 期刊: Journal of Alloys and Compounds
• 影响因子: 6.2
• 作者: P. Jamshidi;C. Panwisawas;E. Langi;S. Cox;Ji-Ling Feng;Liguo Zhao;Moataz M. Attallah

An investigation into patient-specific 3D printed titanium stents and the use of etching to overcome Selective Laser Melting design constraints

对患者特异性 3D 打印钛支架的研究以及使用蚀刻来克服选择性激光熔化设计限制

• DOI: 10.1016/j.jmbbm.2022.105388
• 发表时间: 2022
• 期刊: Journal of the Mechanical Behavior of Biomedical Materials
• 影响因子: 3.9
• 作者: McGee O

Microstructural and Mechanical Characterization of Thin-Walled Tube Manufactured with Selective Laser Melting for Stent Application

用于支架应用的选择性激光熔化制造的薄壁管的微观结构和机械表征

• DOI: 10.1007/s11665-020-05366-9
• 发表时间: 2021
• 期刊: Journal of Materials Engineering and Performance
• 影响因子: 2.3
• 作者: Langi E

In-vitro Study of Effect of the Design of the Stent on the Arterial Waveforms

支架设计对动脉波形影响的体外研究

• DOI: 10.1016/j.prostr.2019.07.007
• 发表时间: 2019
• 期刊: Procedia Structural Integrity
• 作者: Kendall J