Pixel-based Silicon tracker for R3B: preparatory work

R3B 基于像素的硅跟踪器：准备工作

• 批准号: ST/X006573/1
• 负责人: Stefanos Paschalis
• 金额: $ 23.94万
• 依托单位: University of York
• 依托单位国家: 英国
• 项目类别: Research Grant
• 财政年份: 2022
• 资助国家: 英国
• 起止时间: 2022 至 无数据
• 项目状态: 已结题
• 来源: https://gtr.ukri.org/projects?ref=ST%2FX006573%2F1
• 关键词: Pixel; based; Silicon; tracker; R3B

In this project we carry out the preparatory work required in order for the UK team to undertake the construction a charged-particle tracking device for the R3B experiment at FAIR. The device is based on hybrid silicon sensor technology that can detect the charged particles and process the generated electronic signals on the same chip, which allows one to reach unprecedented position sensitivity and very low-noise detection levels. The assembly of the device requires high-precision placement that is undertaken by a robotic instrument and the sensors require careful handling in an atmospheric environment that is as free as possible from dust and other micro-particles. In this project, we aim to install and use such robotic instrument in a purpose-built clean-room environment.

在这个项目中，我们开展了英国团队为 FAIR 的 R3B 实验建造带电粒子跟踪装置所需的准备工作。该设备基于混合硅传感器技术，可以在同一芯片上检测带电粒子并处理生成的电子信号，从而达到前所未有的位置灵敏度和极低噪声检测水平。该设备的组装需要由机器人仪器进行高精度放置，并且传感器需要在尽可能没有灰尘和其他微粒的大气环境中小心处理。在这个项目中，我们的目标是在专门建造的洁净室环境中安装和使用这种机器人仪器。