CORE--FABRICATION, ASSEMBLY, AND TESTING SUPPORT

核心——制造、组装和测试支持

• 批准号: 6583199
• 负责人: David T. BURKE
• 金额: $ 16.41万
• 依托单位: UNIVERSITY OF MICHIGAN AT ANN ARBOR
• 依托单位国家: 美国
• 财政年份: 2001
• 资助国家: 美国
• 起止时间: 2001-04-10 至 2003-03-31
• 项目状态: 已结题
• 来源: https://reporter.nih.gov/project-details/6583199
• 关键词: biomaterial development /preparation; biomedical equipment development; biomedical facility; biosensor device; computer program /software; evaluation /testing; fluid; genotype; method development; miniature biomedical equipment; nucleic acid quantitation /detection; nucleic acid sequence; reagent /indicator

The Core Unit research engineers will be a central resource for devise assembly and testing expertise for all Projects. The research engineers have over 8 years of combined expertise in silicon, glass, and polymer photolithographic fabrication at the Solid State Engineering Laboratory (SSEL). Personnel also have experience in instrumentation design, circuit design, and chemical processing. The research engineers will assures that components are tested and judged consistently, both in isolation and within integrated devices. As a consequence, component testing between projects will references a common benchmark. The Core facility will also allow a pooling of expensive capital resources that are currently held in separate laboratories or are expensive to replicate at several locations. The Core Unit has four Specific Aims: 1) Provide photolithographic fabrication support for all Projects. support will include training and assistance in SSEL procedures as well as large-scale production runs of silicon wafers. Fabrication processes provided by the Core Unit personnel will be backed upon quality control assessment of each fabrication run. 2) Provide deice assembly support for all Projects. The Core will assist in solving assembly and post-fabrication problems for all projects. This will include flow problems, heat and/or mass transport problems, and macro-to-micro scale interfacing. Production level assembly will be available, including wafer dicing, wire bonding, package gluing, and quality assessment. 3) Provide standardized reagents, testing methods, and operation support for all Projects. Core personnel are available for consultation in the design phase of each Project. The Core will assist in the operation of the devices using biological samples, including provision of quality tested common reagents. Computer software support for laboratory instrumentation is also provided. 4) Provide a common platform for testing of devices. The Core will allow students and research engineers from all Projects to use a common set of testing and analysis equipment. Core personnel will develop instrumentation electronics and the uniform test platform for device testing. Test platforms will be constantly improved over the course of the project.

核心单元研究工程师将成为所有项目设计组装和测试专业知识的核心资源。研究工程师在固态工程实验室（SSEL）在硅，玻璃和聚合物光刻制造方面拥有超过8年的综合专业知识。人员还具有仪器设计，电路设计和化学处理的经验。研究工程师将确保在隔离和集成设备中对组件进行一致的测试和判断。因此，项目之间的组件测试将引用一个公共基准。核心设施还将允许汇集昂贵的资本资源，这些资源目前存放在单独的实验室或在几个地点复制成本高昂。核心单元有四个具体目标：1)为所有项目提供光刻制造支持。支持将包括SSEL程序的培训和协助以及硅片的大规模生产。核心股人员提供的制造过程将以每次制造运行的质量控制评估为依据。为所有项目提供设备组装支持。核心将协助解决所有项目的装配和后期制造问题。这将包括流动问题，热量和/或质量传输问题，以及宏观到微观尺度的接口。可提供生产级组装，包括晶圆切割、焊丝粘合、封装粘合和质量评估。3)为所有项目提供标准化的试剂、检测方法和操作支持。核心人员可在每个项目的设计阶段提供咨询。核心将协助使用生物样品的设备的操作，包括提供经过质量测试的普通试剂。计算机软件支持实验室仪器也提供。4)为设备的测试提供一个通用平台。Core将允许所有项目的学生和研究工程师使用一套通用的测试和分析设备。核心人员将开发仪器电子和设备测试的统一测试平台。测试平台将在项目过程中不断得到改进。