权益分类	功能权益	普通用户	{{item.name}}会员
{{category.name}}	{{benefitItem.name}}

Developing the Track Finder and associated electronics for the upgrade of the CMS detector for the High Luminosity LHC

开发轨道查找器和相关电子设备，用于升级高亮度大型强子对撞机的 CMS 探测器

基本信息

批准号：
2514491
负责人：
金额：
--
依托单位：
Imperial College London
依托单位国家：
英国
项目类别：
Studentship
财政年份：
2018
资助国家：
英国
起止时间：
2018 至无数据
项目状态：
已结题

来源：
https://gtr.ukri.org/projects?ref=studentship-2514491
关键词：
Developing Track Finder associated electronics

项目摘要

The Large Hadron Collider (LHC) at CERN will be the world's highest energy particle accelerator for the foreseeable future, and the only facility capable of investigating some of the highest priority topics in fundamental physics. LHC operation will continue until at least 2035, with ever-increasing performance required from the accelerator complex in order to provide useful statistical reach and from the associated detectors. As such the CMS detector will require significant and comprehensive upgrades in order to maintain performance in the presence of much harsher conditions. The UK is leading key aspects of the upgrades to the tracking system, end-cap calorimeters and the trigger system. The common element is the development of high throughput digital electronics, and their tailoring to the three specific sub-systems mentioned above. David's PhD is focused on developments for the tracking system, and in particular for the Track Trigger and the associated 'Design, Trigger and Control' board. The work involves developing suitably powerful software and firmware, as well as algorithmic improvements to the track finding and electron identification, as well as integration tests of parts of the overall system at CERN. David will need to design and build the appropriate test set-ups.

欧洲核子研究中心的大型强子对撞机（LHC）在可预见的未来将是世界上能量最高的粒子加速器，也是唯一能够研究基础物理学中一些最优先主题的设施。大型强子对撞机的运行将至少持续到2035年，为了提供有用的统计范围和相关的探测器，对加速器复合体的性能要求不断提高。因此，CMS检测器将需要进行重大和全面的升级，以便在更恶劣的条件下保持性能。联合王国在跟踪系统、端盖热量计和触发系统升级的关键方面发挥着主导作用。共同的要素是高通量数字电子的发展，以及它们对上述三个特定子系统的定制。大卫的博士学位专注于跟踪系统的开发，特别是跟踪触发器和相关的“设计，触发和控制”板。这项工作包括开发适当强大的软件和固件，以及对径迹寻找和电子识别的算法改进，以及在CERN对整个系统的部分进行集成测试。大卫将需要设计和建立适当的测试设置。