Pacific Centre for Advanced Materials and Microstructures

太平洋先进材料和微结构中心

• 批准号: 326858-2006
• 负责人: Kavanagh, Karen
• 金额: $ 16.6万
• 依托单位: Simon Fraser University
• 依托单位国家: 加拿大
• 项目类别: Major Facilities Access Grants
• 财政年份: 2006
• 资助国家: 加拿大
• 起止时间: 2006-01-01 至 2007-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=327388
• 关键词: Pacific; Centre; Advanced; Materials; Microstructures

The Pacific Centre for Advanced Materials and Microstructures (PCAMM) http://www.sfu.ca/physics/PCAMM/ is a collaborative organization consisting of key major equipment items for materials research located in the Science Centre at Simon Fraser University (SFU) and in the Advanced Materials & Process Engineering Laboratory (AMPEL) building at the University of British Columbia (UBC). The primary goal of PCAMM is to optimize capabilities between the two universities, and to achieve a critical mass of facilities to enable its users to develop new optical, electronic and magnetic devices, and to contribute to many other areas of materials science and engineering. PCAMM was formulated in 1996 from complementary expertise and equipment in surface science and epitaxial growth. It has steadily strengthened and broadened from its core base so that it can now comprehensively address wide-ranging problems of the highest scientific and practical importance associated with advanced materials and microstructures. This facility was greatly boosted by a CFI award in 2001 ($8.3M total) from which a range of new equipment items were added beginning in 2002.  There was additional growth in 2004 with the CFI award of a new laboratory for electronic materials and devices at SFU (4D Labs) and the expansion of AMPEL at UBC.  PCAMM depends critically on the continuing presence of experienced personnel for operation and maintenance as well as upgrades of minor equpiment. The latter provides the crucial reason why MFA support is required for this major regional facility.

太平洋先进材料和微结构中心（PCAMM）www.example.com是一个合作组织，由位于西蒙弗雷泽大学（SFU）科学中心和不列颠哥伦比亚省大学（UBC）先进材料与工艺工程实验室（AMPEL）大楼的材料研究关键主要设备项目组成。PCAMM的主要目标是优化两所大学之间的能力，并实现设施的临界质量，使其用户能够开发新的光学，电子和磁性设备，并为材料科学和工程的许多其他领域做出贡献。PCAMM成立于1996年，利用表面科学和外延生长领域的互补专业知识和设备。它从其核心基础稳步加强和扩大，使它现在可以全面解决与先进材料和微结构相关的最高科学和实践重要性的广泛问题。该设施在2001年获得了CFI奖，（总计830万美元），从2002年开始增加了一系列新的设备项目。2004年，随着CFI授予SFU一个新的电子材料和器件实验室（4D实验室），以及UBC的AMPEL的扩展。PCAMM关键取决于经验丰富的人员的持续存在，以进行操作和维护以及小型设备的升级。后者是需要为这一主要区域设施提供外交部支助的关键原因。