Dynamic studies of surface formation in strip casting

带材连铸表面形成的动态研究

• 批准号: 326759-2005
• 负责人: Gerber, Andrew
• 金额: $ 2.91万
• 依托单位: University of New Brunswick
• 依托单位国家: 加拿大
• 项目类别: Collaborative Research and Development Grants
• 财政年份: 2007
• 资助国家: 加拿大
• 起止时间: 2007-01-01 至 2008-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=364356
• 关键词: Dynamic; studies; surface; formation; strip

Strip casting is an important process utilized in the fabrication of aluminum sheet metal, providing the step where liquid metal is formed into its solid shape.  This forming process is done optimally to meet specific requirements in the final material.  One of the critical requirements is a high degree of surface quality, maintainable across a wide range of alloys and processing conditions.  The focus of this research is to develop a basic understanding of the surface formation process in strip casting.  One outcome of the research will be a  mathematical model to predict the influence of processing conditions on surface quality.  A primary objective of the research is to enable a wider range of aluminum sheet products to be utilized in automotive assemblies, thus taking advantage of its low weight and excellent corrosion resistance in building more efficient automobiles.

带材连铸是铝板材制造中使用的重要工艺，提供将液态金属成型为固体形状的步骤。  该成型过程经过优化，以满足最终材料的特定要求。  关键要求之一是高表面质量，可在各种合金和加工条件下保持。  本研究的重点是加深对薄带连铸表面形成过程的基本了解。  该研究的成果之一将是建立一个数学模型，用于预测加工条件对表面质量的影响。  该研究的主要目标是使更广泛的铝板产品用于汽车装配，从而利用其轻质和优异的耐腐蚀性来制造更高效的汽车。