Architectural applications using single point incremental forming

使用单点渐进成型的建筑应用

• 批准号: 385481-2009
• 负责人: Ham, Marnie
• 金额: $ 1.46万
• 依托单位: University of Ontario Institute of Technology
• 依托单位国家: 加拿大
• 项目类别: Collaborative Research and Development Grants
• 财政年份: 2010
• 资助国家: 加拿大
• 起止时间: 2010-01-01 至 2011-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=463517
• 关键词: Architectural; applications; using; single; point

This application proposes to investigate the use of Single Point Incremental Forming (SPIF) manufacturing process in the field of architectural projects. SPIF is a new manufacturing process which can be used to make sheet metal products without having the need for mass production and thus the high cost to produce. Architectual projects are typically produced in small number and quite often each part is individual. This makes SPIF a possible choice for producing architectual products. SPIF does not have characteristics similar to traditional manufacturing processes, mean no models are available to predict the capabilities of SPIF. Thus each time a field is determine to be a potential match, their is need for research to determine if the products can be made using SPIF.

本申请旨在研究单点渐进成形(SPIF)制造工艺在建筑工程领域的应用。SPIF是一种新的制造工艺，它可以用来制造板材产品，而不需要大规模生产，从而降低了生产成本。建筑项目通常是小批量生产的，而且通常每个部分都是单独的。这使得SPIF成为生产建筑产品的可能选择。SPIF不具有类似于传统制造工艺的特征，这意味着没有模型可用于预测SPIF的能力。因此，每次确定一个油田可能匹配时，他们都需要进行研究，以确定是否可以使用SPIF来制造产品。