Health Monitoring, Diagnostics, and Self Healing in Complex and Networked Engineering Systems

复杂网络工程系统中的健康监测、诊断和自我修复

• 批准号: 36407-2013
• 负责人: Saif, Mehrdad
• 金额: $ 2.11万
• 依托单位: University of Windsor
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2013
• 资助国家: 加拿大
• 起止时间: 2013-01-01 至 2014-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=521368
• 关键词: Health; Monitoring; Diagnostics; Self; Healing

The objective of this research is to address fundamental research challenges in designing the next generation of smart systems that have integrated heath monitoring and self-healing capabilities along with the requirement to meet stringent performance requirements through command, control, and communication. Many complex engineering systems need to perform reliably and efficiently for extended periods of time without any interruption or degradation in their performance. Practical examples of such system are abundant. The applicant continues to be interested, and has a track record in application of his research to aerospace, automotive, manufacturing, autonomous space and underwater vehicles and structures, (nuclear) power and communication; chemical and allied process control industries; energy storage (batteries/fuel cells) and smart grids. All of these systems must perform uninterrupted and within the desired operating range for safety, economic, and environmental reasons. On the other hand, failure or non-performance due to aging are inevitable, thus, an automated ability to continuously monitor the health of the system; detect and rank the severity of faults, isolate, and accommodate for failures through self-healing is of utmost importance. The proposed research meets the needs of many Canadian industries, has a high potential for commercialization, and as importantly, will provide the Canadian industries with a supply of highly trained engineers.

这项研究的目的是解决基础研究的挑战，在设计下一代智能系统，集成了健康监测和自我修复能力沿着的要求，以满足严格的性能要求，通过命令，控制和通信。许多复杂的工程系统需要长时间可靠有效地运行，而不会出现任何中断或性能下降。这种制度的实际例子很多。申请人继续感兴趣，并在其研究应用于航空航天，汽车，制造，自主空间和水下车辆和结构，（核）电力和通信方面有良好的记录;化学和相关过程控制行业;储能（电池/燃料电池）和智能电网。出于安全、经济和环境的原因，所有这些系统都必须在所需的操作范围内不间断地运行。另一方面，由于老化而导致的故障或不性能是不可避免的，因此，持续监控系统健康状况的自动化能力;检测和排名故障的严重性，隔离并通过自我修复来适应故障是至关重要的。拟议的研究满足了加拿大许多行业的需求，具有很高的商业化潜力，同样重要的是，将为加拿大行业提供训练有素的工程师。