Lightweight design of components for exploration/production drilling equipment

勘探/生产钻井设备部件的轻量化设计

• 批准号: 505668-2016
• 负责人: Omri, Karim
• 金额: $ 5.46万
• 依托单位: Canadore College
• 依托单位国家: 加拿大
• 项目类别: Applied Research and Development Grants - Level 2
• 财政年份: 2017
• 资助国家: 加拿大
• 起止时间: 2017-01-01 至 2018-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=641429
• 关键词: Lightweight; design; components; exploration; production

Drill Co Mining and Exploration is seeking to partner with Canadore College to reduce the mass of their main mast assembly.The proposed project will involve in the development and initial validation of designs through prototypes of components for the mast assembly of Drillco's exploration and production drill. The research team at Canadore College will use detailed load cases and lightweight structural design principles (including topology optimization) to reduce the mass of a number of critical components on the mast assembly. Considerations in the process development will include upstream load case analysis, component interoperability, and manufacturability of the final design. The process will be validated through the development of a number of prototype components to be tested by the Drill Co and Canadore teams.

Drill Co 采矿和勘探公司正在寻求与 Canadore College 合作，以减少其主桅杆组件的质量。拟议项目将涉及通过 Drillco 勘探和生产钻机桅杆组件原型进行设计开发和初步验证。卡纳多尔学院的研究团队将使用详细的载荷工况和轻量化结构设计原理（包括拓扑优化）来减少桅杆组件上许多关键部件的质量。流程开发中的考虑因素将包括上游负载情况分析、组件互操作性和最终设计的可制造性。该流程将通过开发多个原型组件进行验证，并由 Drill Co 和 Canadore 团队进行测试。