Development of a 150 hp Dynamometer for Electric Vehicles, Micro-Grids and Renewable Energy Applications

开发用于电动汽车、微电网和可再生能源应用的 150 马力测功机

• 批准号: RTI-2018-00987
• 负责人: Pillay, Pragasen
• 金额: $ 10.93万
• 依托单位: Concordia University
• 依托单位国家: 加拿大
• 项目类别: Research Tools and Instruments
• 财政年份: 2017
• 资助国家: 加拿大
• 起止时间: 2017-01-01 至 2018-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=642314
• 关键词: Development; 150; hp; Dynamometer; Electric

This proposal brings together two diverse areas, electric vehicles and micro-grids for remote communities, under one research umbrella, joined together in the size range and types of electric machines needed for both, in the range of 150 hp. This is the machine size for many passenger electric vehicles (EVs) and is also the size range of renewable energy generators installed or being considered for remote communities. While the research work done by the PI has been in this size range, the ability to test full scale in this range has not been available, hence the purpose of this proposal.

该提案将两个不同的领域，电动汽车和偏远社区的微电网结合在一起，在一个研究伞下，在150马力范围内，将两者所需的电机尺寸范围和类型结合在一起。这是许多乘用电动汽车（EV）的机器尺寸，也是为偏远社区安装或考虑的可再生能源发电机的尺寸范围。虽然PI在该尺寸范围内进行了研究工作，但无法在该范围内进行全尺寸试验，因此提出了本提案。