Quantum Nano-Electro-Mechanical Systems (QNEMS)

量子纳米机电系统（QNEMS）

• 批准号: RGPIN-2019-06975
• 负责人: Champagne, Alexandre
• 金额: $ 1.75万
• 依托单位: Concordia University
• 依托单位国家: 加拿大
• 项目类别: Discovery Grants Program - Individual
• 财政年份: 2019
• 资助国家: 加拿大
• 起止时间: 2019-01-01 至 2020-12-31
• 项目状态: 已结题
• 来源: https://www.nserc-crsng.gc.ca/ase-oro/Details-Detailles_eng.asp?id=679947
• 关键词: Quantum; Nano; Electro; Mechanical; Systems

Quantum Nano-Electro-Mechanical Systems (QNEMS)******We aim to understand simultaneously the mechanical and electronic capabilities of quantum nano-electro-mechanical systems (QNEMS). To do so, we leverage our unique instrumentation (strain and quantum transport at ultra-low temperatures), and nanodevices (suspended low-disorder 2D and 1D crystals). We will pursue three groups of experiments in QNEMS: (1) Strain-engineering of mesoscopic transport: ballistic transport, many-body phases, and valleytronics, (2) Opto-NEMS (NOEMS): interplays of mechanical resonances, photon absorption, and thermal transport, and (3) Tunable Molecular-scale NEMS.******A first cluster of objectives is the strain engineering of transport in 2D materials. Monolayer and bilayer graphene are ideal systems to bridge the gap between the presently limited experiments and advanced theories in strain-engineering of 2D quantum transport. We will apply uniaxial strains up to a few percent to ultra-clean suspended graphene transistors to demonstrate high on/off ratio transistors in pristine (bulk) graphene for applications in flexible electronics. We will also use uniaxial strain in magic-angle bilayer graphene (two graphene crystal stamped on one another with a one degree rotation) to tune its band structure and explore its superconducting phase diagram. We will develop the capability to apply tri-axial strain to graphene to create tunable pseudo-magnetic fields, and achieve valley-polarized currents. ******A second axis will explore photon absorption and heat transport in graphene opto-electronic heterostructures (NOEMS). Large (several microns) suspended devices will be created by stamping 2D crystals above trenches in boron nitride. When adding aluminum reflectors below the suspended 2D materials, the devices will host opto-electro-mechanical cavities. Using them, we will engineer the enhancement of optical absorption in 2D materials. Another set of experiments will be to measure simultaneously the lattice (phonon) and electron (carrier) heat conductivities of 2D materials such as graphene, and bilayer graphene to quantity the energy flow between the charge carriers and phonons.******A third set of objectives is aimed at exploring highly-tunable near-molecular scale (~10-nm) NEMS, consisting of suspended quantum dots (QDs) in single-wall carbon nanotubes (SWCNTs) and graphene. We propose to bridge the gap in the understanding of NEMS between the single-molecule scale and 100-nm scale. We will test the scaling-limit of the mechanical performance of QNEMS, with possible applications as mass sensors and RF mixers. We will study many-body quantum effects taking place in single-molecule electronics such as polaron physics in SWCNT-QDs. Another fascinating prospect is using 10-nm scale SWCNT QDs to make hybrid S-N-S Josephson junction. This will enable us to study the physics of Kondo, Andreev bound states, Shiba states, and their phase diagrams.

量子纳米机电系统(QNEMS)******我们的目标是同时了解量子纳米机电系统（QNEMS）的机械和电子能力。为此，我们利用我们独特的仪器（超低温下的应变和量子输运）和纳米器件（悬浮的低无序2D和1D晶体）。我们将在QNEMS中进行三组实验：(1)介观输运的应变工程：弹道输运、多体相和谷电子学；(2)光电NEMS (NOEMS)：机械共振、光子吸收和热输运的相互作用；(3)可调谐分子尺度NEMS。******第一批目标是二维材料中传输的应变工程。单层和双层石墨烯是理想的系统，可以弥补目前有限的实验和先进的二维量子输运应变工程理论之间的差距。我们将在超清洁悬浮石墨烯晶体管上应用高达几个百分点的单轴应变，以展示用于柔性电子产品的原始（大块）石墨烯高开/关比晶体管。我们还将使用魔角双层石墨烯（两个石墨烯晶体以1度旋转相互压印）的单轴应变来调整其能带结构并探索其超导相图。我们将开发将三轴应变应用于石墨烯的能力，以产生可调谐的伪磁场，并实现谷极化电流。******第二个轴将探索石墨烯光电异质结构（NOEMS）中的光子吸收和热输运。大型（几微米）悬浮装置将通过在氮化硼沟槽上冲压二维晶体来制造。当在悬浮的二维材料下面添加铝反射器时，设备将容纳光电机械腔。利用它们，我们将设计增强二维材料的光吸收。另一组实验将同时测量二维材料（如石墨烯和双层石墨烯）的晶格（声子）和电子（载流子）热传导率，以测量载流子和声子之间的能量流动。******第三个目标是探索高度可调的近分子尺度（~10纳米）NEMS，由单壁碳纳米管（SWCNTs）和石墨烯中的悬浮量子点（QDs）组成。我们建议弥合单分子尺度和100纳米尺度之间对NEMS的理解差距。我们将测试QNEMS机械性能的缩放限制，并可能应用于质量传感器和射频混频器。我们将研究单分子电子学中的多体量子效应，如swcnts - qds中的极化子物理。另一个令人着迷的前景是使用10纳米尺度的swcnts量子点来制造混合S-N-S约瑟夫森结。这将使我们能够研究Kondo， Andreev束缚态，Shiba态及其相图的物理特性。