Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates

用于在柔性基板上低成本制造印刷电子产品的设计和测试基础设施

基本信息

  • 批准号:
    RGPIN-2017-03730
  • 负责人:
  • 金额:
    $ 3.42万
  • 依托单位:
  • 依托单位国家:
    加拿大
  • 项目类别:
    Discovery Grants Program - Individual
  • 财政年份:
    2020
  • 资助国家:
    加拿大
  • 起止时间:
    2020-01-01 至 2021-12-31
  • 项目状态:
    已结题

项目摘要

The need for low-cost health care requires patients to play an active role in their own health care outside traditional hospitals and other government-run institutions using personalized health management systems. Such management systems will be built on low-cost, ultra-low-power consumer devices such as laptops, smart tablets and phones, together with low-cost wearable sensor technologies. The smart devices provide a portable monitoring system with significant processing capability with wireless connections to world-wide-web cloud services. As the number of smart devices sold in the past decade is in excess of 2/5th of the entire world's population, the bottleneck to a low-cost health network for all lies between the smart device and the individual person. It is therefore our intention with this research aim to focus on the “last decimeter” between the individual and the smart device using low-cost electronics and MEMS technologies. This aim will see our attention initially focused on the development of a wearable sensor platform with a disposable front-end that can be manufactured in high volume and low-cost. Disposable medical materials play a large part in many health care protocols involving body fluids or substances. While one may be tempted to construct the entire system with one or two silicon ICs, the cost of throwing away the ICs after use would not be cost-effective. Instead, this work will consider the application of printed electronics (PE) that uses low-cost semiconductor, conductive and dielectric inks that can be dispensed using sheet-based or roll-to-roll print methods, similar to those used to print newspapers and other graphic displays. Moreover, this project will consider new manufacturing techniques, such as design-for-test, design-for-manufacturing, etc., to establish PE as a low-cost, high-throughput manufacturing method for disposable health care use. This project will involve at least nine graduate students (6 Ph.D and 3 M. Eng. students) and five undergraduate students over the duration of this project. Graduate students will receive training through courses, industry interaction, and mentoring on thesis research. In the near term, this project will focus its efforts on the sensory solution to the general problem of urinary incontinence and, in particular, the problem of nocturnal enuresis, which is the accidental or unwanted leakage of urine at night. Incontinence is a prevalent health condition that is rarely discussed, as people living with the condition are often embarrassed to discuss it with their healthcare providers. The World Health Organization calls incontinence “one of the last medical taboos”. However, some estimates indicate that as many as 3.3 million Canadians experience some form of incontinence. The number of people experiencing incontinence will rise dramatically over the coming years due to the aging "boomer" population.
对低成本医疗保健的需求要求患者在使用个性化健康管理系统的传统医院和其他政府运营的机构之外,在自己的医疗保健中发挥积极作用。这样的管理系统将建立在低成本、超低功耗的消费设备上,如笔记本电脑、智能平板电脑和手机,以及低成本的可穿戴传感器技术。这些智能设备提供了一个具有显著处理能力的便携式监控系统,具有与万维网云服务的无线连接。由于过去十年销售的智能设备数量超过世界总人口的五分之二,低成本的全民健康网络的瓶颈在于智能设备和个人之间。因此,我们这项研究的目的是利用低成本的电子和MEMS技术,专注于个人和智能设备之间的“最后一分米”。 这一目标将使我们的注意力最初集中在开发一种具有一次性前端的可穿戴传感器平台,该平台可以大批量和低成本地制造。一次性医疗材料在许多涉及体液或物质的医疗保健方案中发挥着重要作用。虽然人们可能会忍不住用一个或两个硅IC来构建整个系统,但在使用后丢弃这些IC的成本将不会具有成本效益。相反,这项工作将考虑印刷电子(PE)的应用,该印刷电子(PE)使用低成本的半导体、导电和介电油墨,可以使用基于片材或卷到卷的打印方法来分配,类似于用于打印报纸和其他图形显示器的方法。此外,该项目将考虑新的制造技术,如面向测试的设计、面向制造的设计等,以确立PE作为一种用于一次性保健用途的低成本、高通量的制造方法。该项目将涉及至少9名研究生(6名博士和3名英语硕士)。学生)和五名本科生。研究生将通过课程、行业互动和论文研究指导等方式接受培训。 在短期内,该项目将致力于用感官方法解决一般的尿失禁问题,特别是夜间遗尿问题,即夜间意外或不必要的尿漏。大小便失禁是一种很少被讨论的普遍健康状况,因为患有这种状况的人在与他们的医疗保健提供者讨论它时通常会感到尴尬。世界卫生组织将大小便失禁称为“最后的医学禁忌之一”。然而,一些估计表明,多达330万加拿大人经历了某种形式的大小便失禁。由于婴儿潮一代人口的老龄化,未来几年经历大小便失禁的人数将急剧上升。

项目成果

期刊论文数量(0)
专著数量(0)
科研奖励数量(0)
会议论文数量(0)
专利数量(0)

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

数据更新时间:{{ journalArticles.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ monograph.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ sciAawards.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ conferencePapers.updateTime }}

{{ item.title }}
  • 作者:
    {{ item.author }}

数据更新时间:{{ patent.updateTime }}

Roberts, Gordon其他文献

Roberts, Gordon的其他文献

{{ item.title }}
{{ item.translation_title }}
  • DOI:
    {{ item.doi }}
  • 发表时间:
    {{ item.publish_year }}
  • 期刊:
  • 影响因子:
    {{ item.factor }}
  • 作者:
    {{ item.authors }}
  • 通讯作者:
    {{ item.author }}

{{ truncateString('Roberts, Gordon', 18)}}的其他基金

Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
用于在柔性基板上低成本制造印刷电子产品的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2021
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    DGDND-2017-00069
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    DND/NSERC Discovery Grant Supplement
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    DGDND-2017-00069
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    DND/NSERC Discovery Grant Supplement
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2017
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Embedded analog performance monitors for reliable semiconductor circuits and systems
用于可靠半导体电路和系统的嵌入式模拟性能监视器
  • 批准号:
    516249-2017
  • 财政年份:
    2017
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Idea to Innovation
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    DGDND-2017-00069
  • 财政年份:
    2017
  • 资助金额:
    $ 3.42万
  • 项目类别:
    DND/NSERC Discovery Grant Supplement
Design-For-Manufacturing Techniques For Print Electronics Technology With Emphasis On Disposable Wearable Personal Health Monitors
印刷电子技术的制造设计技术,重点是一次性可穿戴个人健康监测仪
  • 批准号:
    RGPIN-2016-04213
  • 财政年份:
    2016
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Design-for-test techniques for 60 GHz ISM radio applications
60 GHz ISM 无线电应用的测试设计技术
  • 批准号:
    89800-2011
  • 财政年份:
    2015
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual

相似国自然基金

数字化生态赋能TEST融合型翻译人才培养模型构建与指标体系研究
  • 批准号:
    2023JJ50396
  • 批准年份:
    2023
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
基于广义测量的多体量子态self-test的实验研究
  • 批准号:
  • 批准年份:
    2021
  • 资助金额:
    30 万元
  • 项目类别:
    青年科学基金项目
基于“Design-Build-Test”循环策略的新型紫色杆菌素组合生物合成研究
  • 批准号:
  • 批准年份:
    2021
  • 资助金额:
    0.0 万元
  • 项目类别:
    省市级项目
破解高质量低费用确定型test-per-clock测试难题的新方法
  • 批准号:
    61804037
  • 批准年份:
    2018
  • 资助金额:
    24.0 万元
  • 项目类别:
    青年科学基金项目
基于Martingale-test理论的无监督人体行为分类算法研究
  • 批准号:
    61403232
  • 批准年份:
    2014
  • 资助金额:
    25.0 万元
  • 项目类别:
    青年科学基金项目

相似海外基金

Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
用于在柔性基板上低成本制造印刷电子产品的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2021
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Infrastructure for silicon photonic test and development
硅光子测试和开发基础设施
  • 批准号:
    RTI-2022-00723
  • 财政年份:
    2021
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Research Tools and Instruments
Develop performance test automated reporting infrastructure for Espial's G4 Set Top Box (STB) Client
为 Espial 的 G4 机顶盒 (STB) 客户端开发性能测试自动报告基础架构
  • 批准号:
    538062-2018
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Experience Awards (previously Industrial Undergraduate Student Research Awards)
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    DGDND-2017-00069
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    DND/NSERC Discovery Grant Supplement
UCore Infrastructure and Automated Regression Test Suite
UCore 基础设施和自动回归测试套件
  • 批准号:
    535965-2018
  • 财政年份:
    2019
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Experience Awards (previously Industrial Undergraduate Student Research Awards)
ICE-T: RC: Performance Evaluation of Advanced Wireless Network Edge Infrastructure - Network Simulation & Test Beds
ICE-T:RC:先进无线网络边缘基础设施的性能评估 - 网络仿真
  • 批准号:
    1836725
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Standard Grant
Design and Test Infrastructure For The Low Cost Manufacture of Print Electronics On Flexible Substrates
在柔性基板上低成本制造印刷电子的设计和测试基础设施
  • 批准号:
    RGPIN-2017-03730
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Discovery Grants Program - Individual
UCore Infrastructure and Automated Regression Test Suite
UCore 基础设施和自动回归测试套件
  • 批准号:
    520886-2017
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Experience Awards (previously Industrial Undergraduate Student Research Awards)
UCore Infrastructure and Automated Regression Test Suite
UCore 基础设施和自动回归测试套件
  • 批准号:
    520917-2017
  • 财政年份:
    2018
  • 资助金额:
    $ 3.42万
  • 项目类别:
    Experience Awards (previously Industrial Undergraduate Student Research Awards)
{{ showInfoDetail.title }}

作者:{{ showInfoDetail.author }}

知道了