Sutudy on Flexible Interface which changes according to Skill

本研究按照以下计划进行。(1)三维曲线输入方法的提出/输入装置的试制/评价实验(2)工人特性检测方法的建议/检测装置的制作/评价实验(3)技能度检测方法和评价方法的建议/使用实验装置的评价实验。(4)技能等级对应界面的提出与评价实验：提出了计算机辅助设计系统中三维曲线的输入方法，试制了该装置，并对精度和处理速度进行了评价。对于300 mm的曲线长度，在精度方面造成约5 mm的误差。所有加工都在0.1秒或更短的时间内完成，工人对加工时间的不相容感记忆犹新。如果机器能够被判断为适当的，信息， ...更多信息 通过表达法，确认了即使是不成熟的人也能表现出与技能人员相同的能力。由于技能程度是根据工作结果和工作过程来评价的，因此评价方法不同。etc.at如果熟练度与疲劳度相关，则可以基于疲劳度来推定熟练度。因此，这种评价方法可以用于任何工作。通过测量生理信息来推测人体的疲劳程度是必要的。提出了不成为工作量的生理信息的检测方法和测量装置，用于试验目的。通过实验，阐明了生理信息与心理疲劳程度的关系。研制了技能型作业模拟器，并进行了根据作业者的技能程度改变界面C/D值的实验。当受试者是技术人员时，工作时间缩短，保持工作成果。该技术的有效性被证实的技能度的进一步提高，通过使用该技术。少

The research was executed according to the following plans. (1) Proposal of input method of three dimension curve / Making of input device for trial purpose /Evaluation experiment. (2) Proposal of detection method of worker's characteristic / Making of detection device for trial purposes / Evaluation experiment. (3) Proposal of detection method of skill degree and evaluation method / evaluation experiment with experimental device. (4) Experiment of proposal and evaluation on skill degree corresponding interface.Three dimension curve input method used with the Computer Aided Design system was proposed, the device was made for trial purposes, and accuracy and the processing speed were evaluated. The error of about 5mm was caused for the length of the curve of 300mm concerning accuracy. All processings were done to 0.1sec or less that the sense of incompatibility was remembered from the worker concerning the processing time. If the machine was able to be judged in adequacy, information wh … More ich the worker had input by it was experssed method was confirmed to being able to demonstrate the same ability as the skill person even by an immature person.The evaluation method is different because the skill degree is evaluated by the work result and the work process, etc.at each work. If the skill degree relates to the tiredness degree, the skill degree can be presumed based on the tiredness degree. Therefore, this evaluation method can use any work. It is necessary to measure physiology information to presume the tiredness degree. The proposal of the detection method of physiology information which did not become a load of work and the measurement device were made for trial purposes. The relation between physiology information and the mental tiredness degree was clarified by the experiment. The simulator of work to require skilling was developed and the experiment by which the C/D value of the interface was changed according to worker's skill degree while working was done. Working hours shortened maintaining the work result when the testee was a skill person. The effectiveness of the proposed technique was confirmed by the skill degree's having improved further by using this technique. Less