Novel Variant of Stirling Engine Prototype Build

这个项目是制造一个原型斯特林发动机，这是一个全新的变种。利用回收的热能发电，显著减少二氧化碳排放。它由一个小型的自给式装置组成，大约370 mm W x 250 mm H x 370 mm D，可以很容易地改装到任何家用锅炉和工业热排放装置上。我们的模拟显示，我们的客户在15个月内获得了ROI。我们相信，即使在相对较低的温差(约200摄氏度)下，发动机也能输出相当大的功率，因此通过采用熔点较低的铝合金压铸来大量生产，成本相对较低。我们的创新目前已在美国和欧盟获得专利。

This project is to manufacture a prototype Stirling engine which is of a completely novel variant. To create electricity from reclaimed heat reducing CO2 emissions significantly.It's comprised of a small lightweight self contained unit approximately 370mmW x 250mmH x 370mmD This can easily be retro fitted to any domestic boiler and industrial heat exhausts. Our simulations have indicated ROI for our customers within 15 months. Thereafter significantly reducing their electricity costs while minimising CO2 emissions.We believe the engine will output significant power even at relatively low temperature differential (circa 200°C), and hence be manufactured relatively cheaply in high volume by die casting in lower melting point aluminium alloys.We have patents now granted in the USA and EU on our innovation.