Training and Dissemination

项目概要/摘要： CM 2 OST的目标是利用我们的集体专业知识来开发、演示和部署新的 技术，使质量的设计方法，以制造结构组织。这些努力 是基于我们的产品的传播和商业化，特别是那些促进 治疗产品的规模化生产。认识到成功创建一个行业将加剧 制造业部门现有的劳动力短缺反映在教育/劳动力的双重焦点上 开发（E/WD）路线图，该路线图导致项目既涉及下一代领域， 丰富了制造业和邻近领域的劳动力。因此，路线图响应项目必须 证明了这些解决方案具有广泛的商业用途。所有员工都将参加培训， 作为其努力的一部分，该中心的传播使命。中心培训的核心目标和 传播部分将包括： 具体目标1：促进传播和了解中心的 现有TE社区、邻近的科学和工业领域以及 更广泛的社会。CM 2 OST将每年至少赞助一次突出活动，以突出其活动。 CM 2 OST T&D还将利用现有的渠道，如出版物，邀请演讲，短期课程， 赞助的会议，以及创造新的传播途径，如V/R或混合云 教育指导。该中心将利用BioFab的全国会员（>165强），以达到广泛的 包括下一代TE科学家在内的观众。 具体目标2：通过商业化传播硬件/软件。两个关键因素 将制造硬件/软件开发项目推向商业化将是：1）如果 它解决了一个确定的制造瓶颈; 2）如果它是普遍超越原型测试床 用于验证其设计和功能。符合这两个标准的CM 2 OST项目更有可能成功 将其转化为商业上可行的产品，并将通过CM 2 OST传播活动加以强调。 具体目标3：培训研究人员和制造商使用我们的技术，使他们能够 正确地将其应用于自己的研究或商业产品开发。E/WD努力增加 工作人员的多样性、技能和规模是该领域取得成功的关键。CM 2 OST培训将创建一个 我们新技术的“早期采用者骨干”。该干部将展示CM 2 OST开发的 技术，将其用于研究和产品开发。我们将充分利用 一对一培训班、短期课程后再进行培训班等方法，以及 更新的培训方法，如远程视频辅助培训。

Project Summary/Abstract: The goals of CM2OST are to draw on our collective expertise to develop, demonstrate and deploy novel technologies that enable a Quality-by-Design approach to the manufacturing of structural tissues. These efforts are predicated on the dissemination and commercialization of our products, especially those that facilitate the scalable manufacture of therapeutic products. Recognition that success in creating an industry will exacerbate the existing labor shortage in the manufacturing segment is reflected in the dual foci of the education/workforce development (E/WD) roadmap, which leads to projects that both engage the next generation of the field and enriches the workforce in manufacturing and adjacent fields. As such, roadmap responsive projects must demonstrate that the solutions have broad commercial uses. All staff will take part in the training and dissemination mission of the Center as part of their effort. The core aims of the Center’s Training and Dissemination component will be: Specific Aim 1: Specific Aim 1: Promote the dissemination and understanding of the Center’s technologies throughout the existing TE community, adjacent scientific and industry fields, as well as the more general society. CM2OST will sponsor at least one prominent event annually to highlight its activities. CM2OST T&D also will leverage existing avenues such as publications, invited presentations, short courses and sponsored conferences, as well as create novel avenues of dissemination such as V/R or hybrid cloud-based educational instruction. The Center will leverage BioFab’s nationwide membership (>165 strong) to reach a wide audience including the next generation of TE scientists. Specific Aim 2: Hardware/software dissemination through commercialization. The two key factors for moving forward with a manufacturing hardware/software development project to commercialization will be: 1) if it addresses an identified a manufacturing bottleneck; and 2) if it is generalizable beyond the prototype test bed used to validate its design and function. CM2OST projects that meet both criteria are more likely to successfully translate into commercially viable products and will be emphasized by CM2OST dissemination activities. Specific Aim 3: Train researchers and manufacturers in the use of our technologies such that they can correctly apply them to their own research or commercial product development. E/WD efforts to increase the diversity, skill and size of the workforce are essential to success of the field. CM2OST training will create a “cadre of early adopters” for our new technologies. This cadre will demonstrate the benefit of CM2OST-developed technology by using it in their research and product development. We will leverage both proven educational methodologies such as one-to-one training sessions, and short courses followed by training sessions, as well as newer methodologies of training such as remote video-assisted training.