GreenTech3D - New Generation Green Technology for Post-Processing of 3D Printed Parts
GreenTech3D - New Generation Green Technology for Post-Processing of 3D Printed Parts
批准号:
87644
负责人:
金额:
$11.12万
依托单位国家:
英国
项目类别:
Collaborative R&D
财政年份:
2020
资助国家:
英国
项目状态:
已结题
起止时间:
2020 至 --
中文摘要
新冠肺炎疫情和地缘政治不确定性正在给全球制造业、物流和自由贸易带来重大变化。这增加了英国、美国和欧洲按需3D打印制造的采用,特别是在医疗用品、Covid-19检测设备、个人防护装备和个人配件\[Nature, _The global rise of 3D printing during the COVID-19 pandemic, 12 August 2020\]的制造方面。3d打印提供了在英国本地快速创建必要医疗用品的能力。这种能力具有国家战略重要性,特别是在危机和关键部件短缺时期,如Covid-19疫情期间。在许多情况下,当地医院和机构通过3D打印在使用点接收专用部件比从中央政府获得更快。在全国范围内,有许多具有商业和学术能力的3D打印系统,必须利用这种资源。由于3D打印的逐层特性,打印出来的物品表面粗糙、粉状、多孔。根据世界卫生组织(WHO)和FDA的3D打印指南,这会导致细菌、真菌的积累和生长,并增加松散聚合物颗粒攻击呼吸系统的风险。这个问题阻止了3D打印物品进一步用于口腔/呼吸医疗目的。目前3D打印表面的后处理方法包括机械磨损技术,这种技术不会密封表面,而且会产生聚合物微纤维,可能会攻击呼吸系统。此外,这些方法排放了数百升被微塑料污染的淡水。因此,目前的后处理技术不足以使用于医疗呼吸目的的物品平滑。完全绿色和可持续的后处理技术将为工业3D打印在医疗市场的普遍采用提供巨大的推动。总部位于谢菲尔德的智能增材制造系统开发商和制造商增材制造技术公司(AMT)开发了新一代绿色技术,用于其基于蒸汽的BLAST平滑过程。这种技术的适应将取代传统的污染物后处理方法,从而增加整个3D打印过程周期的可持续性和环境因素。在此之前,该行业发布了多项公告,改变了政策,并获得了大量拨款,以转向清洁的可持续技术,并取代旧的污染设备。
英文摘要
Covid-19 and geopolitical uncertainties are bringing significant changes into the global manufacturing, logistics and free trade. This has increased uptake of the on-demand 3D printing manufacturing in UK, USA and Europe, especially for the manufacture of medical articles, Covid-19 testing devices, PPE and personal accessories \[Nature, _The global rise of 3D printing during the COVID-19 pandemic, 12 August 2020\]._3D printing offers the capability to rapidly create necessary medical articles locally within the UK. This ability is of strategic national importance, especially in the times of crisis and shortage of vital components as seen during Covid-19 epidemic. In many cases it is faster for the local hospitals and institutions to receive specialised parts by 3D printing them at the point of use rather than from the central government. Nationwide, there are many 3D printing systems both in commercial and academic capacity and this resource must be utilised.Due to the layer-by-layer nature of 3D printing, the printed articles result in rough, powdery and porous surfaces. This causes the accumulation and growth of bacteria, fungi and increases the risk of the loose polymer particles attacking the respiratory system as noted by the World Health Organisation (WHO) and FDA guidelines for 3D printing. This issue prevents any further use of 3D printed articles for oral/respiratory medical purposes.Current methods for the post-processing of 3D printed surfaces involve mechanical abrasion techniques, that do not seal the surface and create polymer micro-fibres that can attack the respiratory system. Furthermore, these methods discharge hundreds of litres of micro-plastic polluted freshwater. Therefore, current post-processing techniques are not adequate for the smoothing of articles to be used for medical respiratory purposes. Fully green and sustainable post-processing technology would provide a massive boost to the general adoption of industrial 3D printing in medical market.Additive Manufacturing Technologies (AMT), a Sheffield-based developer and manufacturer of smart Additive Manufacturing systems, has developed a new generation green technology to be used in its vapour-based BLAST smoothing process.The adaptation of such technology would replace traditionally pollutant post-processing methods thus increasing the sustainability and environmental factor in the whole 3D printing process cycle. This follows multiple announcements, policy changes and numerous grants for the industry to move towards clean sustainable technologies and replace old polluting equipment.
期刊论文(0)
专著(0)
科研奖励(0)
会议论文
海外基金