CD uniformity improvement on the self-aligned spacer double-patterning process by resist material modification
CD uniformity improvement on the self-aligned spacer double-patterning process by resist material modification
复制标题
通过抗蚀剂材料改性改善自对准间隔物双图案化工艺的CD均匀性
DOI：
10.1117/12.916321
复制
发表时间：
2012
期刊：
影响因子：
--
通讯作者：
Ohmori K
中科院分区：
文献类型：
--
作者：
Ohmori K
Double patterning techniques (DPT) with 193nm immersion lithography are being thought to be one of the most promising candidates for the 22nm node and beyond. Especially, self-aligned spacer double patterning (SADP) has already been established as pitch doubling process and adapted in high volume manufacturing of NAND flash memory device. Moreover, ultra fine resolution can be obtained to repeat the SADP step twice as pitch quadrupling. Simple cost effective SADP scheme which is resist core SADP process has already been demonstrated to obtain not only simple line and space patterning also trench and 2D patterning as well by Tokyo Electron LTD.[1, 2, 3] In this process, a SiO2 spacer film is being directly formed on a tri-layer resist stack. This pattern is then transferred onto an underlying spin-on carbon (SOC) film and the final pattern is resolved on the TEOS film. Roughness and verticalness of resist pattern could affect the quality of SiO2 spacer film deposition and it could determine the CD uniformity of final pattern. Therefore, it's been thought that low line-width roughness (LWR) resist pattern and vertical resist profile make a better CD contribution and uniformity on final pattern. Experimental results on SADP process will be shown and then it'll be discussed that specially designed resist materials which indicates small LWR and vertical profile could have a potential to improve CD uniformity after pitch splitting SADP process.
登录
查看更多内容
适用于 22 纳米及以上节点的先进自对准 DP 工艺开发
DOI：
--
发表时间：
2010
期刊：
Advanced Lithography
影响因子：
--
作者：
A. Hara;E. Nishimura;M. Kushibiki;S. Yamauchi;Sakurako Natori;K. Yabe;K. Oyama;Hidetami Yaeasghi
通讯作者：
Hidetami Yaeasghi
将间隔件 DP 工艺扩展到 22nm 及以上的重要挑战
DOI：
--
发表时间：
2010
期刊：
Advanced Lithography
影响因子：
--
作者：
K. Oyama;E. Nishimura;M. Kushibiki;K. Hasebe;S. Nakajima;H. Murakami;A. Hara;Shohei Yamauchi;Sakurako Natori;K. Yabe;Tomohito Yamaji;R. Nakatsuji;H. Yaegashi
通讯作者：
H. Yaegashi
向 22 纳米节点实施双图案化工艺
DOI：
--
发表时间：
2009
期刊：
Lithography Asia
影响因子：
--
作者：
H. Yaegashi;Eiichi Nisimura;K. Hasebe;T. Kawasaki;M. Kushibiki;A. Hara;S. Yamauchi;Sakurako Natori;Nakajima Shigeru;H. Murakami;K. Yabe;S. Shimura;F. Iwao;K. Oyama
通讯作者：
K. Oyama
用于制造 2xnm 节点半导体器件的抗蚀剂核心间隔图案化工艺
DOI：
--
发表时间：
2011
期刊：
Advanced Lithography
影响因子：
--
作者：
Koutaro Sho;Tomoya Oori;Kazunori Iida;Katsutoshi Kobayashi;Keisuke Kikutani;Katsumi Yamamoto;F. Aiso;K. Matsunaga;E. Shiobara;Koji Hashimoto
通讯作者：
Koji Hashimoto
使用间隔物进行图案化以扩大当前光刻工具的分辨率极限
DOI：
--
发表时间：
2006
期刊：
SPIE Advanced Lithography
影响因子：
--
作者：
W. Jung;Choi;Jae;Sung;Sung;Jong;Jae;Byung;Sung
通讯作者：
Sung