Engineering Research Equipment: Electrical Discharge Grinding Machine

工程研究设备： 放电磨床

• 批准号: 9500389
• 负责人: Kamlakar Rajurkar
• 金额: $ 8万
• 依托单位: University of Nebraska-Lincoln
• 依托单位国家: 美国
• 项目类别: Standard Grant
• 财政年份: 1995
• 资助国家: 美国
• 起止时间: 1995-04-01 至 1997-03-31
• 项目状态: 已结题
• 来源: https://www.nsf.gov/awardsearch/showAward?AWD_ID=9500389&HistoricalAwards=false
• 关键词: Engineering; Research; Equipment; Electrical; Discharge

9500389 Rajurkar This engineering research equipment award is to purchase an electrical discharge grinding machine (EDGM), that will be modified as part of the empirical and analytical program at the University of Nebraska to build an innovative new machine, the Abrasive Electrical Discharge Grinding Machine (AEDGM). There is a subtle difference in the commercial machine that they will purchase - the EDGM - and the prototype they will develop - the AEDGM. The commercial machine they will purchase removes material only by spark erosion with a rotating graphite wheel acting as an electrode. Adding abrasives to the wheel allows for mechanical mechanisms to remove material as well. This is important when processing metal matrix composites or ceramics, because the electrical-thermal mechanism only works on conductive materials, leading to low removal efficiency and poor finish for this class of advanced materials. By adding the abrasive mechanical mechanism, this team of researchers will broaden the types of materials, the rates for processing, and the quality of products produced. The work will be done at the University of Nebraska's Nontraditional Manufacturing Processes Laboratory, a facility that has an international track record in this field of research. This award will build the experimental infrastructure to investigate this new process - abrasive electro discharge machining - which promises higher productivity in shaping advanced materials like titanium based alloys, tungsten carbide, and polycrystalline diamond. ***

小行星9500389 该工程研究设备奖将购买一台电火花磨削机（EDGM），该磨削机将作为内布拉斯加大学经验和分析计划的一部分进行修改，以建立一种创新的新机器，磨料电火花磨削机（AEDGM）。 他们将购买的商用机器-EDGM -和他们将开发的原型-AEDGM有一个微妙的区别。 他们将购买的商用机器仅通过旋转石墨轮作为电极的火花腐蚀来去除材料。 在砂轮上添加磨料也允许机械机制去除材料。 这在加工金属基复合材料或陶瓷时很重要，因为电热机制仅对导电材料起作用，导致这类先进材料的去除效率低，光洁度差。 通过增加研磨机械机制，该研究团队将扩大材料类型，加工速度和产品质量。 这项工作将在内布拉斯加大学的非传统制造工艺实验室完成，该实验室在这一研究领域拥有国际记录。 该奖项将建立实验基础设施，以研究这种新工艺-磨料放电加工-这有望提高钛基合金，碳化钨和多晶金刚石等先进材料的生产率。 ***